Examples of 'insertion depth' in a sentence
Meaning of "insertion depth"
insertion depth - This phrase is commonly used in technical contexts to refer to the distance or level at which an object or device is placed or inserted into something else
How to use "insertion depth" in a sentence
Basic
Advanced
insertion depth
Device for adjusting needle insertion depth.
Re check insertion depth before completing press process.
Parallel flow evaporator with variable channel insertion depth.
Burner blast tube insertion depth and brickwork.
Fittings need to be pushed on completely to meet the recommended insertion depth.
Needles insertion depth and angle were according to the literature.
Keep special attention to the minimum insertion depth of the seat post.
Thus an insertion depth is defined.
Removal of the depth stop does not alter the set screw insertion depth.
Septum actuator with insertion depth limiter and compression compensator.
It consists in moving the needle carrier vertically along the predetermined insertion depth.
Do not change the insertion depth of the tube and connecting joint.
The tip of the actuator only advances half of the distance of the insertion depth.
The insertion depth of the needles is particularly a function of the nonwoven thickness.
There is therefore little risk to start the injection before reaching the right insertion depth.
See also
Insertion depth limiter and press collar guarantee successful press fit connection.
The insertion guides may include stops that limit an insertion depth into the disc space.
In this way the insertion depth towards the insertion direction can be individually adjusted.
Qixue and Qipang were pierced with a medium insertion depth.
Gradually reducing the insertion depth after starting the movement of said rotary tool.
After refitting, work can continue at the same insertion depth.
This design also limits insertion depth of the article and better control of the gap.
Thus, this method may be shorter than the optimal insertion depth.
The insertion depth I is thus perfectly controlled.
It is also possible, in addition or exclusively, to record the maximum insertion depth reached.
The insertion depth is calculated as follows,.
The first parameter is the distance d4, which will be referred to as insertion depth.
Check the correct assembly / insertion depth on the basis of the position marking.
A stainless steel probe is included, which has a comfortable hand grip and etched insertion depth marks.
In other words, the insertion depth is determined so that such weld strength is achieved.
The cross-head was set to achieve the desired spike insertion depth in the port tube.
The insertion depth is 75mm from the paper margin to the middle of the impression.
Increment markings every 10 cm confirm insertion depth.
In this case, the insertion depth L is not directly linked with the needle 7 length.
The limiter flange 1012 can be configured to assist a user to locate a proper insertion depth.
Alternatively, the insertion depth could be variable, and / or controlled.
The shoulder 51 and the stop 45 limit the maximum insertion depth.
The large insertion depth of 150 mm considerably reduces heat dissipation errors.
A spacer 1212 is provided to indicate proper or safe insertion depth of the device.
In some instances, insertion depth limiter comprises a molded surface of septum actuator 10.
For example, after moving for 50 mm, the tool reaches the fixed insertion depth.
The insertion depth operating element 68 is rotatably mounted on the power tool housing 56.
The cannula 22 protrudes out of the housing 2 with a length ( a ) which corresponds to the insertion depth.
The taper may limit an insertion depth of an implant member onto member mount 430.
The length of the barrel 34 and / or flash grooves 40 may similarly accommodate this minimal insertion depth.
Please observe the minimum insertion depth marks for saddle stem and handlebar min. 60 mm.
Insertion Depth - manufacturer, factory, supplier from China.
Gradually reducing the insertion depth of said rotary tool ( 200 ) before retreating it ; and.
The insertion depth L can be adjusted by using an intermediate ring 116 of a predetermined specific thickness.
Shoulder 18 limits the insertion depth of locating sleeve 30 shown in FIGURE 4.
You'll also be interested in:
Examples of using Insertion
Show more
This insertion thus does not seem necessary
Entry plug locked at insertion ready position
Insertion of a new roll of paper is described at item
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
