Examples of 'instron' in a sentence
Meaning of "instron"
Instron: Instron is a noun used as a brand name for a manufacturer of testing equipment, especially materials testing systems
How to use "instron" in a sentence
Basic
Advanced
instron
Instron stands for intelligent testing technology worldwide.
This measure is made with an Instron apparatus.
Instron testing exposes the material to stretching forces.
All test results were performed on an Instron tester.
Instron grips clamp the sample and separate at a constant rate.
This is a problem that Instron could potentially address.
Instron is a trademark.
Peel strengths were measured on an Instron tester.
Start the Instron to compress the dowel.
A strip was gripped between the jaws on the Instron.
Control of the Instron is then transferred to the computer.
The bond strength was measured using an Instron machine.
Using an Instron machine the peel strength was determined.
The tensile bars were then pulled on the Instron.
An Instron tensile tester was used to determine tensile properties.
See also
The adhesion strength is measured with an Instron machine.
By an Instron type universal testing machine.
This effect can be readily measured using an Instron.
The Instron test conditions were the same as described hereinabove.
Fiber testing was performed on an Instron machine.
The Instron curve for peelable foil is ideally rectangular in shape.
The testing procedure on the Instron machine is described below.
We used a machine called an Instron.
A computer interfaced to the Instron is given a signal to start the test.
A strip of appropriate length was again gripped between jaws on the Instron.
The folded skein was mounted on an Instron tensile testing machine.
Flexural rigidity in bending was calculated from the output of the Instron.
Elongation versus load was measured with an Instron tensile testing machine.
The tensile force is recorded continuously by a computer networked to the Instron.
The tests were carried out using an Instron dynamometer mod.
The Instron consists of two arms fitted with pneumatic sample clamps.
The measurements are carried out with an Instron type dynamometer.
The fibers were tested on an Instron tensile testing machine equipped with an environmental chamber.
The bond strength was measured using an Instron tensile tester.
A saline tank fixed to the Instron to keep the specimen hydrated during testing.
The peel strength is determined by a peel test performed on an Instron machine.
The specimen is mounted in a support on the Instron and carefully aligned in a vertical position.
The forced required to break the tubing was measured by an Instron tester.
The Instron compression test was designed to treat the whole barrel as a tubular specimen.
High temperature testing was performed on an Instron test machine as described above.
This was accomplished using the extension cycle feature of the Instron.
A single fiber was loaded into the Instron jaws for testing.
The Instron had the capability to test at both high and low temperatures.
The measure of the load force was made by using an Instron instrument.
The Instron machine may be adjusted so that the pulling clamp has a uniform speed.
The filament tape was connected to the other portion of the Instron tester.
The Instron comprises a vertical frame with a moving crosshead with attached load cell.
Weathered shell bones were immediately taken to the Instron room and tested.
Instron Connect also helps users keep track of their system calibrations and software versions.
Tensile strength was measured by means of a testing apparatus available from Instron Corporation.
