Examples of 'instron tensile' in a sentence
Meaning of "instron tensile"
instron tensile: Refers to Instron, a brand known for manufacturing materials testing equipment, specifically for measuring tensile properties of materials
How to use "instron tensile" in a sentence
Basic
Advanced
instron tensile
An Instron tensile tester was used to determine tensile properties.
The bond strength was measured using an Instron tensile tester.
The fibers were tested on an Instron tensile testing machine equipped with an environmental chamber.
Tenacity is typically measured on a tensile testing machines such as a Instron tensile tester.
The oven used was that from Instron tensile equipments with electronic control and convection heating.
Elongation versus load was measured with an Instron tensile testing machine.
The Instron tensile test machine model No.
The folded skein was mounted on an Instron tensile testing machine.
An Instron Tensile Tester is used for the test.
The two loops were then pulled apart using an Instron tensile testing machine.
A model 1122 Instron tensile tester was used to measure the break elongation properties of the samples.
Tensile characteristics Tensile characteristics were measured on Instron tensile machine.
Tensile properties were measured using an Instron tensile tester with a crosshead speed of 500 mm / min.
The bond strength between the films was then measured using an Instron Tensile Tester.
The film was stretched on an Instron Tensile Tester at room temperature using a 3:1 draw ratio.
See also
ASTM test bars were prepared and were tested using an Instron tensile machine.
The longitudinal compliance was measured on an Instron Tensile Tester using pneumatic grips as follows.
Modulus The Young 's modulus of the hydrated film was measured using an Instron tensile tester.
As the tensile testing machine, an Instron tensile testing machine can be used.
Table VII sets forth the cohesive force values as measured on the Instron Tensile Tester.
The lengthwise extension may be measured using an Instron Tensile Testing Machine.
Initial heat seal strength ( g / inch ) was been measured on an Instron Tensile tester.
The moduli of the lenses were measured on an Instron tensile testing apparatus,.
Tensile test, Tensile test was performed on 30 mm wide strips using an Instron tensile tester.
The seal strength was determined using an Instron Tensile Tester Model 1122.
After 24 hours specimens were die cut and tested using an Instron tensile tester.
The Velcro ® loops were then pulled apart using the same Instron tensile testing apparatus.
The 10 mm strip was clamped in an Instron tensile tester.
The tensile properties of all materials are measured on a computer controlled Instron tensile tester ( Model 5565 ).
Tensile The tensile testing is done with an Instron tensile tester series 4261.
You'll also be interested in:
Examples of using Instron
Show more
Instron stands for intelligent testing technology worldwide
This measure is made with an Instron apparatus
Instron testing exposes the material to stretching forces
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
