Examples of 'intake hose' in a sentence
Meaning of "intake hose"
An intake hose refers to a pipe or tube that is used to allow the flow or intake of a substance, typically a fluid or gas. It is commonly used in engineering, automotive, and plumbing contexts to direct the intake of air, water, or other substances into a system, engine, or device. The intake hose is designed and positioned to regulate the flow and ensure efficient intake of the desired substance
How to use "intake hose" in a sentence
Basic
Advanced
intake hose
Air intake hose is above exhaust pipe.
Attach accessory tool to intake hose if desired.
The intake hose will connect to left side of the.
The fi lter on the water intake hose is clogged.
Push the intake hose onto the suction set assembly.
Blocked strainer in water intake hose.
Remove the intake hose fitting filter.
Disconnect the clear plastic water intake hose.
The water intake hose is now pressurized.
Repeat same steps for the air intake hose.
Cutting the intake hose may result in noise.
Check that there are no kinks in the water intake hose.
The water intake hose is bent.
Check that there are no kinks or snags in the water intake hose.
The filter on the water intake hose is clogged.
See also
A stop valve must be installed before the filter system intake hose.
Support the air intake hose with pipe clamps.
Insert the fl ue exhaust hose into the air intake hose.
Unscrew the intake hose fitting from the tap.
A stop valve must be installed before the fi lter system intake hose.
Disconnect water intake hose between machine and water supply.
Inspect the filter screen in the end of the pressure washer intake hose.
Connect the water intake hose to the existing check valve in the intake.
Make sure that no dirt or other foreign bodies enter the air intake hose.
Connect open end of discharge hose to vacuum intake hose connector and turn on machine.
The intake hose can be pushed into the high-pressure cleaner housing for storage.
Always use the connecting element supplied with the intake hose to connect the hose.
For continuous measurement the intake hose has to supply the sensor with a dependable sample flow.
As soon as I MacGyver this into an intake hose.
N Hold the intake hose in the container.
Instruction manual Water intake hose.
N Slide the intake hose as far as.
For your configuration, position the air intake hose as shown.
N Disconnect water intake hose from machine and water supply.
Draining the appliance - Unscrew the water intake hose and high.
N Screw the cap with intake hose onto a separate detergent container.
Bu! on on the Quick Release Faucet Adapter, which will depressurize the water intake hose to.
N Unscrew the cap with intake hose from the detergent tank.
An intake hose 27 is arranged fixed in relation to the inlet pipe 26.
N Screw the cap with the intake hose onto the detergent tank.
The air outlet 38 is formed at the other end of the intake hose 36.
Too long water intake hose Replace.
With water turned off, insert a garden hose into the vacuum intake hose as shown Figure 37.
The other end of the intake hose 27 is connected to the air cleaner 23.
Cross-section of the intake hose too small.
Disconnect electrical power and water intake hose to dishwasher before cleaning and / or.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Intake
Show more
Remove the intake grille by pulling it outwards
Check to see if the air intake is obstructed
The air intake must not be covered
