Examples of 'inventive example' in a sentence
Meaning of "inventive example"
An inventive example is a creative and original illustration or demonstration used to explain or support a concept or idea. It showcases innovative thinking and helps to enhance understanding.
How to use "inventive example" in a sentence
Basic
Advanced
inventive example
Again these particles are larger in the inventive example.
Polymer properties of all inventive example and comparative examples.
In the inventive example a setup composed of two vacuum distillation columns was chosen.
This should translate to improved sealing performance for the inventive example.
The inventive example can also be extrusion coated at high speeds and high temperatures.
Test compounds of the present invention are shown by the Inventive Example numbers.
The results show that the inventive example has lower shrinkage than the comparative examples.
The reaction was carried out as described in inventive example 1.
Inventive example 1 is shown to be effective in boosting the visible light protection.
Next, the effects of improving the abrasion resistance were verified by using an inventive example 8.
However, the ester component according to the inventive example shows significantly improved seal compatibility.
However, distinct processing disadvantages are in evidence as compared with inventive Example 4.
The treatment of Inventive Example 5 was repeated except that the cellulase was not added.
TOTM was produced by the process described in inventive example 4.
The properties of the inventive example and the comparative example are compared in Table 5.
See also
DOTP was produced by the process described in inventive example 1.
The overcoat layer in Inventive Example 7 was opaque white in appearance.
In this manner, a laminate for barcode printing of Inventive Example 1 was produced.
In Inventive Example IE1, a polypropylene made of two polymer fractions was prepared.
DOTP was produced as in inventive example 1.
Inventive Example 2 Inventive Example 2 was prepared according to the following procedure.
In the table rotating mechanism 6 in the inventive example shown in FIG.
Inventive Example 4 is made with a mixture of a monomeric CTA and a polyene.
Figure 5 is an enlarged view of the seam of the inventive example shown in Figure 4.
Example 5 The following inventive example is produced on equipment as described in Comparative Example 5.
Thus, it was confirmed that the percutaneous absorption preparation of Inventive Example 2 was excellent.
Table 7 indicates that Inventive Example 6 exhibited an excellent property balance.
Moreover the talc gives higher OIT as shown by comparing inventive example 1 and 2.
Inventive example 28 is just the core with no shell.
The same reaction was carried out using the diastereomer mixture obtained in Inventive Example 1.
Conversely, the heat resistance of Inventive Example 6 was dramatically improved.
Feedstock was produced according to the procedure given for Inventive Example 1.
Inventive Example 13 was prepared as previously described.
The resulting pore structure was similar to Inventive Example 1.
In comparison to inventive Example 4, comparative Example 1 shows a much more severe thermal yellowing.
All other conditions remain the same as the Inventive Example 1.
The gloss reducing additive used in Inventive Example 12 was made according to the following procedure,.
Furthermore, the fluorescence image indicated that for Inventive Example Ex.
As seen in Table 12, the inventive example had better adhesion than the comparative example.
The best combination of properties is achieved by inventive example no. 1.
For those of Inventive Example 1, fine scratches were made, leading to a reduced commercial value thereof.
The process conditions employed in the manufacturing of Inventive Example 1 are provided in Table 1.
In Inventive Example 2, borosilicate glass was used as the inorganic binder.
In this evaluation, the film fabricated from Inventive Example 2 showed good machinability.
Figure 8 shows an optical optical micrograph of a lateral cross-section of Inventive Example 1.
With comparative Example 2, in contrast to inventive Example 4, hydrazine can be detected.
Inventive Example 1 Inventive Example 1 is made according to the following procedures,.
The cross-sectional structure of the shoulder part in the present inventive example 11 was checked.
Thus, especially inventive example Ex1 provides a cost-efficient alternative solution to CE2.
Figure 3 shows the disintegrated tablet according to inventive Example 1.
You'll also be interested in:
Examples of using Inventive
Show more
Your inventive skill is being put to the test
Local staff are outstandingly inventive in accomplishing repairs
The inventive nanoparticles find different applications
Examples of using Example
Show more
A hypothetical example is provided in the following table
Description of method of use with practical example
Example of information to be entered in the transport document
