Examples of 'is threaded' in a sentence
Meaning of "is threaded"
Threaded: This phrase typically refers to a type of conversation or discussion where multiple individuals are actively participating and replying to each other's messages or comments. It is commonly used in online forums, social media platforms, or group chats where users can create threaded replies to specific posts or comments
How to use "is threaded" in a sentence
Basic
Advanced
is threaded
The clutch assembly is threaded on the crankshaft.
The outer surface of the neck is threaded.
Make certain it is threaded correctly before tightening.
Ensure that sufficient line is threaded.
A rocket cap is threaded into the base.
A distal section of each gear through bore is threaded.
The connector is threaded to receive the nut.
The end of the rod is threaded.
A set screw is threaded into each orifice.
It is however advantageous if the projecting part is threaded to some extent.
The warp is threaded through such holes.
Check that the upper thread is threaded correctly.
This joint is threaded as permanent joint.
The tubular part of these washers is threaded on the inside.
The bushing is threaded into the adapter bore.
See also
The internal channel is threaded.
The sleeve is threaded for adjustment.
The free end of the smooth part of the rod is threaded.
The bobbin case is threaded wrongly.
The tube is threaded to the narrowed or blocked coronary artery.
Sometimes a live grub is threaded onto the dart.
A cap is threaded on the open end of the inner tube.
This type of commentary is threaded throughout the novel.
It is threaded into the top coupling of the oil drain tube.
The theme of music is threaded throughout the book.
The capsule has apertures through which the wire is threaded.
But a sense of time is threaded through everything we perceive.
Every little bone has up to four holes in it and is threaded with a wire.
The guide wire is threaded through this lumen.
In the preferred embodiment the threaded member used is threaded reinforcing bar.
This ring in turn is threaded on its inner surface.
A third method is where the earring has a straight post which is threaded.
A drain plug usually is threaded into the ferrule.
A bolt is threaded into a bushing bore using the internal threads.
An internally threaded nut is threaded over the split ends.
This strip is threaded on up to the nuclear space through the annulus.
Preferably the leak detection port is threaded to accommodate a sensor.
The stopper is threaded outwardly and fixedly receives the rod.
A positioning sleeve having an inner cavity is threaded with the vía hole.
Each inlet tube is threaded vertically through an inside wall.
The inside of the suction and discharge holes is threaded to a certain depth.
Often the rod is threaded to allow adjustment with a screwdriver.
The distal segment of the catheter then is threaded onto the wire.
The annular periphery is threaded so as to be secured to the hub by screwing.
The sensor contains a piezoelectric element and is threaded into the engine block.
A lock nut is threaded on the front end of the chuck.
Each person will be attached to a long rope that is threaded through a series of obstacles.
The head end is threaded and the entry end is unthreaded.
A hook protrudes from one end and a rope is threaded at the opposite end.
The base trim is threaded for the special screws supplied.
You'll also be interested in:
Examples of using Threaded
Show more
The clutch assembly is threaded on the crankshaft
Threaded valve neck for fitting actuator
Make certain it is threaded correctly before tightening
