Examples of 'isolating switch' in a sentence
Meaning of "isolating switch"
An isolating switch is a device used to physically disconnect an electrical circuit or equipment from the power supply, often for maintenance or safety purposes
How to use "isolating switch" in a sentence
Basic
Advanced
isolating switch
Installing the isolating switch and cables.
Isolating switch of a high voltage metalclad installation.
The panel is supplied without a mains isolating switch.
The isolating switch is easily accessible by the consumer.
Connect the cable from the isolating switch to.
The isolating switch is easily accessible by the customer.
Do not plug in any other appliance at this isolating switch.
A double isolating switch must be fitted.
This appliance should be connected to a circuit that incorporates an isolating switch.
Power isolating switch must be opened and locked.
The installation must include a power isolating switch or circuit breaker.
An isolating switch must be installed near the compressor.
Disconnection from the power supply must be by way of an isolating switch.
Make sure the isolating switch is accessible by the customer.
The device thus acts both as a circuit breaker and as an isolating switch.
See also
Press the isolating switch on the back of the shredder.
C Wiring circuit breaker or isolating switch.
A suitable isolating switch is incorporated in the fixed wiring in an acceptable position.
Ensure the appliance is connected to its own isolating switch refer to E.
A lockable power isolating switch must be installed near the compressor.
Emergency disconnectors New toggle switch disconnectors RSD enhance the family of isolating switch disconnectors RSI.
A master battery isolating switch shall be provided in accordance with the following.
Make all connections within the Isolating Switch.
Make sure the isolating switch on the front of the generator is off.
Figure 3 shows a section through an isolating switch.
A suitable isolating switch providing full disconnection from the mains power.
Screw cable with pipe-type cable shoes to isolating switch.
Isolating switch control devices described in these two documents have disadvantages.
Connect the cable from the isolating switch to the electrical supply wiring.
The isolating switch will be easily accessible to the customer with the hob.
In this position the inputs of the isolating switch are all separated from its outputs.
The isolating switch must be easily accessible to the customer with the hob installed.
Turn off the appliance at the isolating switch and unplug from the power point.
Operating mechanism for a five-pole phase inverter isolating switch.
Make all connections within the Isolating Switch in accordance with the manufacturers instructions.
FIG . 2 is a table summarizing the operation of a phase inverting isolating switch of the above kind.
Turn the safety isolating switch to the ON position I.
This model includes six magnetic circuit breakers with a 100 amp isolating switch.
Install the isolating switch and on / off switch if required.
FIG . 2 is a table summarizing the operation of this isolating switch used as a phase inverter.
An all-pole isolating switch with a contact gap of at least.
Luminaires equipped with an isolating switch and a fault-detection system.
An isolating switch according to claim 1, wherein said electrode is a toroid of circular cross-section.
Make all connections within the isolating switch and the on / off switch if required.
An isolating switch 36 for earthing 37 as well as a device 38 for protection against overvoltages.
Connect the cable from the isolating switch to electrical supply wiring, and re-check installation.
The isolating switch 32 is located in the recessed region 20 and housed under the terminal cover 21.
The connecting points for the isolating switch 3 can be integrated in the first busbar system 1.
An all pin isolating switch with a contact gap of at least 3 mm must be installed.
Use a double-pole isolating switch with a minimum contact gap of 3mm in.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Isolating
Show more
Our lab is isolating the virus as we speak
The solution to this is using an isolating transformer
Close the isolating valves on the manifolds
