Examples of 'joints should' in a sentence
Meaning of "joints should"
joints should: This phrase is often used in the context of construction or mechanics to suggest that the connections or joints between various components should be durable and well-built
How to use "joints should" in a sentence
Basic
Advanced
joints should
The location of construction joints should be planned.
Welded pipe joints should be used wherever possible.
In places where the overlap overlap joints should not be present.
The joints should be cut shortly before bonding.
The panels formed by the control joints should be nearly square in shape.
All joints should be in good condition and sealed.
The edges of the weld joints should not show any defects.
All joints should be tight to avoid air leaks.
Constant pain or recurring pain in the joints should also be looked upon.
All joints should be properly sealed.
The veins of the hand dorsum and those close to joints should be avoided.
Joints should be brushed into place.
The number of joints should be minimized.
Joints should be staggered between layers.
Deep flexion or extension of joints should be avoided due to connective tissue laxity.
See also
Joints should be tightly sealed.
In such structures welded joints should not be placed in the most stressed locations.
Joints should not reduce the fire resistance of the whole.
General lubrication of all joints should also be carried out whenever the machine is.
Joints should be kept to a minimum and compression fittings must not be used.
Yet partners with their joints should be careful to avoid aches and pains.
Joints should be moved rhythmically through their full range of motion during a repetition.
They should be straight and the all the joints should fit snugly.
Your joints should move with a certain fluidity.
Any exercises that cause you to put pressure on locked joints should be avoided.
All joints should be glued and fastened with screws.
The deteriorated mortar in vertical joints should be cleaned out by using a chisel and maul.
All joints should be periodically checked by smoke pencil or other visual aid.
Nailed joints are difficult to make and screwed joints should be pre-pierced.
Construction joints should be designed and specified by a structural engineer.
Large items, such as whole chickens and joints should not be defrosted in this way.
All the joints should be well sealed with adhesive.
If you exercise correctly, your muscles should be sore, but your joints should not.
Vertical joints should be staggered.
If you are training properly, your muscles should be sore, but your joints should not.
Vertical joints should be sealed.
The joints should not negatively affect the electrical and mechanical properties of the conductor.
For maximum benefit, windows should fit tightly and joints should be fully weather-proofed.
Short side joints should have still greater strength.
Protectors, Kneepads, helmets, gloves to protect joints should be used in some cases.
Injuries to joints should be properly rehabilitated to minimize complications later in life.
The thickness of the joints should not exceed 13 mm.
The joints should be oiled regularly with light precision mechanics oil and protected against soiling.
Welded or sleevetype Joints should be staggered every 600 mm.
Joints should be tight-fitting and clamped during curing for maximum strength.
Take care here, all the joints should be neat, accurate and without gaps.
Joints should be adjusted according to procedures included in the Q-dummy manuals 2.
Protection Rating IP65 ( All joints should be sealed when installation ).
Joints should preferably be adjusted according to procedures included in the Q - dummy manuals.
Expansion joints should be covered.
You'll also be interested in:
Examples of using Joints
Show more
We smoke a couple joints and forget everything
Joints shall be well aligned and adjusted
Elimination of deck joints and deck drains
