Examples of 'kick plate' in a sentence
Meaning of "kick plate"
kick plate ~ In the context of hardware or construction, a kick plate is a protective plate or panel installed at the lower portion of a door to prevent damage from accidental kicks or impacts. It serves as a barrier between the foot and the door surface, minimizing the risk of wear and tear or cosmetic damage
Show more definitions
- Alternative form of kickplate
How to use "kick plate" in a sentence
Basic
Advanced
kick plate
Press the kick plate button to open.
Replace burner valve and kick plate.
Lift up on kick plate to release plate from shoulder screws.
Installing side panels and kick plate.
Remove kick plate from top of range and grate pack.
This usage is similar to that of a kick plate.
Gently lay kick plate aside to avoid scratching the stainless.
Base profiles and stainless steel kick plate.
Remove the kick plate screws and then the kick plate.
Remove screws from kick plate.
Lay kick plate to the side to avoid scratching the stainless steel.
Reattach screws to the top of the kick plate.
Push kick plate down against front of range until the top.
Remove foam between door and kick plate.
Glazing and the brass kick plate are not placed yet.
See also
The present invention relates to a household appliance comprising a kick plate.
A kick plate protects the bottom of the door being damaged by wheelchair footplates.
The wiring diagram is located behind the kick plate in a clear plastic bag.
The kick plate is shaped as a box having a front wall and four side surfaces.
Base profile / stainless steel kick plate.
Confi rm that the kick plate gasket is on the bottom of the kick plate.
Reinforced steel core, titanium kick plate.
Remove front kick plate and check for any broken light bulbs or loose light bulbs.
Locate and set aside the dishwasher 's kick plate.
Opening the kick plate cover / pulling the drawer.
Unlock the 4 condenser locks after opening the kick plate.
Gently pull the kick plate towards you careful not to scratch the fireplace hearth / base.
Loosen the 2 screws recessed in the front kick plate see illustration below.
Slide kick plate back into position and tighten recessed screws . Careful not to over tighten.
Clean the filters in the condenser / filter drawer under the kick plate.
NOTE, Do not install kick plate until instructed to do so.
When turning the wrench, make sure that it does not scuff the kick plate.
Kick Plate - Completes bottom of shelving unit.
Thus, since the finger is prevented from slipping, the kick plate can be easily detached.
The kick plate 10 is removable to provide access to the light 12.
Figure 4 - is the partial perspective view of a kick plate from inside.
This polymer board may be attached to a monolithic wheel bracket and kick plate 250.
Use two ( 2 ) 8 sheet metal screws ( supplied ) to facilitate holding your kick plate in place.
