Examples of 'lock plate' in a sentence
Meaning of "lock plate"
lock plate: Refers to a device or component used to secure or fasten something in place by preventing movement or access. This term is often used in engineering, construction, or mechanical contexts
How to use "lock plate" in a sentence
Basic
Advanced
lock plate
Twist filter lock plate clockwise to lock.
Locate the disc against the lock plate.
Safety switch lock plate not fitted.
The lock plate can also be integrated in an accessory.
Press down on miter lock plate to disengage.
A lock plate does not need to be flat.
For tool without lock plate.
Locate the lock plate onto the machines spindle.
For tool with lock plate.
This lock plate is my last one from the collection.
Man the lock plate.
Lock plate is not inserted or poorly inserted into stop switch.
Catch safety lock plate.
Install the lock plate and plate ixing bolt again.
The slide member is then free to slide relative to the lock plate.
See also
The lock plate may include a clevis at a top portion thereof.
The spring thus holds the lock plate in the locked position.
The lock plate locks the rocking retainer against a stationary member.
A release button integral with the lock plate extends beyond the outer wall of the housing.
This lock plate has a keyhole shaped opening through which the cartridge post extends.
While pushing the lock plate with one hand, lock.
Lock plate 5a lock position adjusting projection.
The same pattern is formed by the pins 1 which is on the lock plate.
However, the lock plate can be other shapes.
The dog is a spring-loaded arm pivoted on the outside of the lock plate.
The lock plate also includes an off-axis opening through which an actuator member passes.
A reset spring stretched between a base end portion of said lock plate and said frame ;.
The release-part and the lock plate may also be combined into a single unit.
Hence the pins lock the slide member in position relative to the non-magnetic lock plate.
To install the templet guide, pull the lock plate lever and insert the templet guide.
Loosen the plate ixing bolt . And then remove the lock plate.
Lock plate with saw-tooth internal face.
Internal to the housing is a lock plate ( not illustrated ).
The lock plate 7 is apt to be deformed by forced opening of the inspection lid 5.
The rotation of the toilet seat 2 initiates rotation of the lock plate 7.
The output rod 3 and lock plate 4 remain in frictional contact.
The door is closed because bolt 5 hooks into a lock plate ( not shown ).
The door lock plate 55 is slidably coupled to the door side frame 52 in a vertical direction.
The first projection 2b is a part of the plunger 2, and it is engaged with a lock plate 5.
The operating projection 68 facilitates the lock plate 6 to be pushed out in the releasing direction.
In this condition the flange-cover joint is detensioned allowing slidable movement of the lock plate 400.
The rotating movement of the above lock plate 33 is allowed by riding across this projection 47c.
The sliding guide groove 64 has a length coinciding with the sliding stroke of the lock plate 6.
Upon rotation of the toilet seat 2, the lock plate 7 can be rotated within the cylinder 5.
When the lock plate 90 is at a locking position as shown in Fig.
Double-check the radio relay . Man the lock plate.
Figure 9 shows a plan of a lock plate for the embodiment of Figures 1 to 8.
A locking solenoid 10 is provided for this lock plate 7.
Then, the lock plate 50 returns and becomes stable in the state shown in FIG.
FIG . 16 is an elevation view showing the lock plate moved laterally to its unlocked position ;.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
