Examples of 'laser line' in a sentence
Meaning of "laser line"
A laser line refers to a thin, focused beam of laser light that is projected in a straight line. It is often used as a visual guide or reference in various applications such as construction, alignment, or scientific experiments, where precision and accuracy are required
How to use "laser line" in a sentence
Basic
Advanced
laser line
Before shifting the laser line or performing.
A laser line can be selected in this mode.
Dual triangulation laser line smart sensor.
Projecting a vertical and a horizontal laser line.
Ewag laser line test pilot for research.
Using the sparkeye laser line system.
If the laser line differs a bit you will be.
Adjust the position of laser line as follows.
When laser line is dim and almost or entirely.
Check the position of laser line regularly for.
Laser line flickers for alert.
X laser crosshairs horizontal and vertical laser line.
A laser line level is a very handy tool to own.
The sensors are based on the laser line triangulation.
A laser line is projected on the surface.
See also
Always mark the center of the laser line or dot.
The laser line serves to excitate chlorophyll molecules.
Always mark the centre of the laser line or dot.
If the laser line brightness suddenly increases or the projected.
Move the tool as necessary to position the laser line.
Compare the laser line with the reference line.
Scrolling pendulum action jigsaw with laser line generator.
The projected laser line cross appears on the ceiling.
The spacer insert is used to extend the laser line.
Shift the laser line to the right of the blade.
Always use the centre of the laser line for marking.
Shift the laser line to the left of the blade.
The laser will turn on and project a horizontal laser line.
When laser line appears dim and hard to see.
Pull down the head and observe the laser line.
Width of the laser line changes with the distance.
The line scanning element may comprise a laser line scanner.
The laser line with the saw blade if needed.
Position the unit with the laser line at the reference point.
The laser line can set to allow horizontal and vertical projection.
The thickness of the laser line changes with the distance.
Perform cutting by overlapping the ink line with the laser line.
Align the laser line with the mark on the workpiece.
Align cutting line on workpiece with edge of saw blade or laser line.
Now adjust the blue laser line in the same procedure.
Align the cutting line on your workpiece with the laser line.
Adjusting the laser line for the right side of the blade.
Work on the grooving again and check the position of the laser line.
Adjusting the laser line for the left side of the blade.
The universal laser spirit level optionally generates a laser dot or a laser line.
Move the laser line with the buttons in the horizontal plane.
Use only the centre of the laser line to make your marking.
Move the laser line cross by turning until it precisely coincides with point.
The application is when a very narrow laser line is scattered by aerosols or molecules.
The duration of the treatment is regulated by the run speed of the laser line.
You'll also be interested in:
Examples of using Laser
Show more
I am checking for laser beam alarm triggers
The laser plumb can be adjusted as follows
Before shifting the laser line or performing
Examples of using Line
Show more
One in a long line of successful cop marriages
Select the data to display on that line
Those withdrawals are in line with international law
