Examples of 'laser lines' in a sentence
Meaning of "laser lines"
Laser lines refer to the visible lines produced by laser beams, often used in scientific and industrial applications for alignment, measurement, or cutting purposes
How to use "laser lines" in a sentence
Basic
Advanced
laser lines
Protractor angle laser lines figure j.
The laser lines are preferably parallel to one another.
Move the tool as necessary to position the laser lines.
The laser lines can be used as references to a square angle.
Perform this check for both vertical laser lines.
All the laser lines you could wish for.
The measuring tool is levelled in as soon as the laser lines no longer flash.
The laser lines may be generated through a diffractive lens.
After power on the instrument the laser lines can be selected as follows.
The laser lines no longer necessarily run vertical to each other.
The visibility range of the laser lines depends on the ambient conditions.
The laser lines no longer necessarily run perpendicular to each other.
Several arrangements can be envisaged depending on the size of the laser lines.
The laser lines can be powered one at a time or at the same time.
Do not use the laser for any purpose other than projecting laser lines.
See also
Laser lines are highly visible with its two times brighter diode.
Use the markings on the laser head to position the laser lines at a predetermined angle.
The laser lines may also treat the underside of the substrate.
Laser triangulation methods also may scan one or more laser lines across an object.
The laser lines can be switched on and off independently of each other or together.
When using pulse function the laser lines will be a little bit weaker than usual.
Laser lines are able to pass through uneven surfaces for having elevated laser beams.
DO NOT stare directly at the laser lines.
The intensity of the laser lines can vary depending on the battery quality.
Mark the intersection point of the laser lines 8.
The various laser lines may treat the substrate simultaneously or in a delayed manner.
The laser is projecting 2 laser lines when the laser.
Green laser lines produce laser alignment that is among the latest developments.
When the automatic levelling is switched off, the laser lines flash continuously.
Horizontal and vertical laser lines and the plumb line points appear aft er switching on.
Immediately after switching on, the appliance emits two laser lines from the laser aperture.
The two laser lines should cross where the drill meets the work piece.
The handy cross line laser with extra-long laser lines for horizontal and vertical aligning.
Note, the laser lines will only level if the tool is kept within 5 from vertical.
Second harmonic ( SH ) microscopy measurement illustrated preferred orientation of crystallization in laser lines.
To adjust the laser lines to the edge of the cut, follow the instructions below.
TOPTICA 's iChrome CLE is a compact laser engine that combines four laser lines in one box.
The tool produces two laser lines in horizontal and in vertical direction, to transfer a mark.
Pressing the ON / OFF buttons again turns the laser lines off.
The laser lines will flash briefly after 3 seconds if the automatic shut-off is deactivated.
Maxion 's quantum cascade laser and interband cascade laser lines were integrated into Thorlabs 's TQE facility.
All the laser lines you could wish for … Anything to make science beautiful.
Pressing the ON / OFF keys again turns the laser lines off.
Locked layout laser lines figure h & i.
In various embodiments, visión system 120 is operable to project one or more laser lines.
Both vertical laser lines run at a 90 angle to each other.
LASER SAFETY / CLASSIFICATION The four iOX5 emits four visible laser lines and three laser points.
Alignment of vertical laser lines Turn the device 250 to adjust the vertical line.
Checking the 2 vertical laser lines.
Twenty-two laser lines are installed in the four halls . © CEA.
You'll also be interested in:
Examples of using Laser
Show more
I am checking for laser beam alarm triggers
The laser plumb can be adjusted as follows
Before shifting the laser line or performing
Examples of using Lines
Show more
Connection to party lines is subject to state tariffs
Lines and related installations agtc agreement
I used to run lines with margot kidder
