Examples of 'leds flash' in a sentence
Meaning of "leds flash"
The phrase 'leds flash' refers to the action of light-emitting diodes blinking or turning on and off in quick succession. This phrase is commonly used in the context of electronic devices, lighting systems, and technology
How to use "leds flash" in a sentence
Basic
Advanced
leds flash
Then the two LEDs flash red.
Button LEDs flash to indicate a successful operation.
The four indicator LEDs flash rapidly.
Two LEDs flash for its duration.
The green and yellow LEDs flash together.
Both LEDs flash slowly change batteries.
Activation will be displayed all green LEDs flash.
Red and blue LEDs flash alternately.
Two LEDs flash simultaneously on the printer control panel.
The red and green LEDs flash alternately during.
The LEDs flash twice slowly and then remain switched on.
The icon is displayed and the LEDs flash blue.
The red LEDs flash four times.
An audible signal is emitted and the LEDs flash three times.
All LEDs flash with a code appearing on screen.
See also
After two seconds both LEDs flash two times.
Three LEDs flash at a fast rate if telegram transmission is interrupted.
All the temperature setting LEDs flash at the same time.
Both LEDs flash twice in green to indicate the activation.
If the operation completes successfully all four channel LEDs flash quickly four times.
White and orange LEDs flash alternatively twice.
The LEDs flash and an audio tone plays in a random pattern triggering a physiological reaction.
Absorption and float LEDs flash synchronously simultaneously.
In the case of damage all the Leds flash.
The status LEDs flash blue while charging.
The LED display and fixture button LEDs flash to.
Bulk and absorption LEDs flash synchronously simultaneously.
Power the control unit and check that all the Leds flash rapidly for.
The blue LEDs flash twice.
The LEDs flash whenever the mask detects that the wearer has entered REM sleep.
The LED display and fixture button LEDs flash to indicate a.
All LEDs flash rapidly and water gets warm.
Red and Green LEDs flash.
The green LEDs flash when the receiver is on grade.
Continue to press until the LEDs flash GREEN.
All three LEDs flash one after another periodically.
Will know if Calibration Mode is activated when the MANUAL and ADS LEDs flash alternately.
All battery capacity LEDs flash simultaneously while charging.
When an intruder enters a curtain, the red and yellow LEDs flash.
All LEDs flash rapidly and water remains cold.
LED illuminated LEDs flash slowly briefly.
The LEDs flash three times slowly and then remain switched on.
The LED display and fixture LEDs flash to indicate a successful operation.
Both LEDs flash quickly no connection between the wheel and the receiver.
Acknowledgement, red and blue LEDs flash alternately three times.
The blue LEDs flash three times and engagement does not occur.
Acknowledgement, the red and blue LEDs flash three times.
When these LEDs flash reduce the input signal level.
Once the clutching time has expired, the red LEDs flash once.
The red LEDs flash and all the buttons are locked.
