Examples of 'lever fully' in a sentence
Meaning of "lever fully"
lever fully - This phrase is often used in mechanical contexts to indicate the action of pushing a lever as far as it can go in order to achieve a certain result or to activate a mechanism fully
How to use "lever fully" in a sentence
Basic
Advanced
lever fully
Push the lever fully to the left.
Swivel out the clamping lever fully.
Turn swivel tube lever fully clockwise when spraying down.
Release the throttle lever fully.
Open the choke lever fully before pulling the throttle.
Pull the throttle lever fully.
Open the choke lever fully when checking the engine oper.
Always set the speed change lever fully to the.
Pull the throttle lever fully rearward to the low idle position.
Always turn the action mode changing lever fully to.
Move the choke lever fully to the left.
Turn the power switch on while maintaining the drain lever fully open.
Move the throttle lever fully to the right.
The shoe can not be adjusted without opening the shoe adjusting lever fully.
Leave the throttle lever fully released.
See also
Rotating the lever fully to the rear locks the fence in position selected.
Press the clutch lever fully down.
Move the shift lever fully to the left and then forward into the Rposi.
To apply the brake turn the brake lever fully clockwise.
Push the throttle lever fully down and then switch on the transmitter.
Turn on the spot Steering lever fully squeezed.
Move the shift lever fully to the right and then backwards in position R.
With the Select Drive lever fully engaged.
Should the lever fully engage on theratchet, but the rear wheels not lock into.
Position the starter lever fully to the left.
Close the choke lever fully by moving it to the position 3.
If the engine is cold, close the choke lever fully.
Always set the speed change lever fully to the correct position.
To release the quick release lever, rotate the lever fully to the left.
Turn the fuel cap lever fully clockwise to the ON position.
To lock the quick release lever, rotate the lever fully to the right.
Turn the brake lever fully counter-clockwise to its lower stop OFF position.
To release the brake, turn the lever fully anticlockwise.
Pushing the lever fully forward to " S " will activate the safety.
Continue to hold the cutting-means lever fully against the handlebar.
Turn the change lever fully in the direction of the “ ” mark to set “ rotation + hammering ”.
To release the brake turn the brake lever fully counter-clockwise.
By moving the throttle lever fully back, the engine will Idle down.
Colder outdoor temperature, Pull the choke lever fully out.
Move the throttle lever fully to the LOW position.
Pull the cover open lever fully toward you.
Ing, Press the piston advance lever fully until adhesive is visible in the mixing nozzle.
Before cutting, pull the throttle lever fully to achieve the maximum.
Turn the fuel filler cap vent lever fully clockwise to the ON position.
In this case, rotate the blade clamp lever fully again, then make sure that.
You'll also be interested in:
Examples of using Fully
Show more
Neither side fully respected the agreement
Fully clean the parts with water
The batteries should be fully recharged afterwards
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
