Examples of 'lift lever' in a sentence
Meaning of "lift lever"
lift lever ~ a mechanism or device used to raise or lower an object by moving a lever or handle up or down, commonly found in elevators or car jacks
How to use "lift lever" in a sentence
Basic
Advanced
lift lever
Do not lift lever during brewing cycles.
Remove water tank and lift lever.
Raise attachment lift lever to highest position.
Lift lever is located on left side of fender.
Lower attachment lift lever to its lowest.
Lift lever on bar knob and turn counter.
Raise attachment lift lever to its highest po si tion.
Lift lever to unlock the brake.
Brush housing lift lever group.
The lift lever is spring loaded.
Disengage the squeegee lift lever from the up.
Move the lift lever to a height of cut position.
Tonearm lift with hydraulic action and lift lever.
Place bowl lift lever in down position.
Select desired height of cut with attachment lift lever.
See also
Attachment lift lever is spring loaded.
Tone arm lift with hydraulic action and lift lever.
Raise the lift lever to the highest position.
Select the height position of the cutting deck by placing the deck lift lever.
Lower mower lift lever to height adjustment knob.
The toast will remain in the warm toasting cavity until the lift lever is raised.
Place bowl lift lever in up position to check clearance.
Move mower height adjustment lift lever forward to low er.
Use the lift lever to change the height of cut.
Lower the deck until the lift lever is stopped by.
Lift lever forward and the vinyl record will begin to play.
Lower the toaster lift lever or levers as far as possible.
After rear lift links are disconnected, the attachment lift lever will be spring loaded.
Put attachment lift lever in desired cutting height slot.
To check the progress of your toast during a toasting cycle, raise the manual lift lever.
Press down on lift lever to start the toasting cycle.
Put the needle over the lead in-groove and lower the tonearm lift lever.
Use the extra lift lever to remove small pieces of bread.
Raise squeegee mount bracket using squeegee lift lever Figure 3.
Pull back on squeegee lift lever to raise squeegee mount bracket.
Connect presser foot lift chain 5 between presser foot lift lever 3 and treadle 4.
Have a tight grip on lift lever when changing position of the lever.
Have a tight grip on rod and engage slowly . 16 . Raise attachment lift lever to highest position.
Place the deck lift lever in the desired mowing height setting.
Set parking brake lever ( P ) and lower attachment lift lever N.
Press down on lift lever to lower the toast back into the toaster.
To shift from first gear to neutral, lift lever half its full stroke.
Tap the lift lever to lower position and wait until decks stop moving.
Lower the cutting unit by moving the lift lever forward and connect the cutting unit.
Raise the lift lever any time during the toasting cycle to view the toast 's progress.
With the engine running, push the hydraulic lift lever forward to the floating position.
Push the lift lever backward, the tone arm will gently rise up.
Lower squeegee by releasing squeegee lift lever from the lock position Figure 11.
Tap the lift lever to raise position and wait for 3 to 5 seconds.
Look at the height of cut position number ( 3 ) on the lift lever 1.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Lift
Show more
Do not lift lever during brewing cycles
Maybe this will lift your spirits
Lift both guard barriers to their up locked po
