Examples of 'line voltage' in a sentence
Meaning of "line voltage"
line voltage - This phrase refers to the electrical voltage supplied by a power source, such as an electrical outlet or power line. It indicates the level of voltage available for use in electrical systems or appliances. Line voltage can vary depending on the region or country, but it is typically in the range of 110-240 volts
How to use "line voltage" in a sentence
Basic
Advanced
line voltage
Insulation for all line voltage connections.
Line voltage too high or too low.
Wiring diagram for a line voltage circulator.
The line voltage at the fi xture is correct.
Voltage measure switch for line voltage.
Check input line voltage to be with in machines.
Observe correct polarity of incoming line voltage.
Use the line voltage thermostat provided.
Check motor connection and line voltage.
Is there line voltage on the electronic charge.
The compressor deck is fed by line voltage.
The line voltage and frequency must.
Its gate is linked to a test line voltage.
Line voltage was progressively increased by an autotransformer.
Directly wired line voltage could be used.
See also
Line voltage must not exceed rated voltage.
Wiring diagram for a line voltage electric heater.
The line voltage is attenuated using a simple.
Make sure that the line voltage is disconnected.
No line voltage connections should be made to any circuit.
Clears automatically when line voltage returns to normal.
Check line voltage and upgrade lines as required.
Isolate all wires in building from line voltage.
Mains line voltage depending on model.
Power cord connected to line voltage.
Line voltage you will use.
Connect only in the complete absence of line voltage.
Reduced line voltage lowers the available tightening torque.
Changing the speaker line voltage.
The line voltage exceeds the permitted limiting value.
In some areas there may be line voltage instability.
Connect the line voltage wires to the appropriate terminals.
The available tightening torque is influenced by line voltage.
Disconnect charger from line voltage by removing main plug.
This takes place by measuring the line voltage.
Line to line voltage must be twice line to ground voltage.
Excellent reproducibility not affected by line voltage fluctuation.
The line voltage selector switches are on the rear panel.
Trolleybuses shall be designed to operate at a rated line voltage of either.
The switching of line voltage is done internally by modifying wire bridges.
An undersized extension cord will cause a drop in line voltage.
External line voltage thermostats should be treated as single stage only.
Use a voltmeter to determine if the power line voltage is dropping.
Set the line voltage selector switch to the correct voltage.
Plan to supply the unit with proper line voltage and.
The line voltage must be reliably regulated in various operating statuses.
Wire the air cleaner directly to line voltage using wire.
The line voltage selector switch is located on the rear panel.
Check wall socket and test for proper line voltage.
A known source such as line voltage to determine proper meter functioning.
You'll also be interested in:
Examples of using Line
Show more
One in a long line of successful cop marriages
Select the data to display on that line
Those withdrawals are in line with international law
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
