Examples of 'lock knob' in a sentence
Meaning of "lock knob"
A lock knob is a device or mechanism, often found on doors or windows, that can be rotated or operated to secure or lock them. It is used to control access and ensure the safety or privacy of the enclosed space
How to use "lock knob" in a sentence
Basic
Advanced
lock knob
Clutch cover lock knob is too tight.
Loosen the miter angle lock knob.
Set the lock knob to the on position.
Tighten by rotating the lock knob clockwise.
Bevel lock knob bevel scale.
Tighten the drop foot lock knob.
Mitre angle lock knob is not tight.
Loosen the mitre angle lock knob.
Bevel angle lock knob is tight.
Retighten the drop foot lock knob.
Loosen the table lock knob by turning it counterclock.
Loosen the drop foot lock knob.
Tighten the table lock knob by turning it clockwise.
Tighten the mitre table lock knob.
Fasten the lock knob to secure its position.
See also
Fasten the mitre table lock knob.
Tighten the lock knob to lock the tool body.
Loosen the mitre table lock knob.
Attach the remaining lock knob to the other side of.
Slightly loosen the chain cover lock knob.
Tighten the miter lock knob before cutting.
Once proper spacing is set tighten fence lock knob.
Tighten edge guide lock knob securely.
A rotation lock knob may be connected to the translation rod.
Tighten the bevel lock knob securely.
Loosen lock knob and raise or lower upper blade guide.
Tool rotating small lock knob.
A translation lock knob may be connected to the down rod.
Tighten hex nut and bevel lock knob securely.
Loosen the bevel lock knob by turning the knob counterclockwise.
This can be important for low lock knob efforts.
Always tighten the lock knob securely in place before use.
The door may be unlocked manually by raising the lock knob.
Rotate the chain cover lock knob counterclock.
The lock knob provides a quick release of each sort of clamped material.
Rotate the chain cover lock knob clockwise to secure.
Lock the saw arm by securely tightening the bevel lock knob.
Turn the lock knob.
Tighten the lock knob securely to lock stop bar in new position.
It is recommended to tighten the miter lock knob before all cuts.
Loosen the lock knob and lift the router again.
Always secure the turntable by tightening the miter angle lock knob.
Tighten miter gauge lock knob on left side of slide table.
Lock the router in its lowered position using the lock knob.
Tighten the table lock knob after tilting the table.
Lock knob and washer locate at the outside of the open ended slot.
Tighten the stop bar lock knob to set depth of plunge.
Set the miter gauge to desired angle and tighten the lock knob.
Retighten the cutting head lock knob before machine operation.
Screw lock knob assembly into threaded hole in the slide table until hand tight.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
