Examples of 'lock nuts' in a sentence
Meaning of "lock nuts"
Lock nuts are a type of fastener or hardware that is used to secure or lock two objects together. They are designed with a special mechanism, such as a nylon insert or a series of grooves, to prevent the nut from loosening due to vibration or other external forces. Lock nuts are commonly used in various industries, including automotive, construction, and manufacturing
How to use "lock nuts" in a sentence
Basic
Advanced
lock nuts
All four lock nuts should be tightened.
Unscrew the lower handle lock nuts.
Tighten all lock nuts again by hand.
Secure in place with the lock nuts c.
All lock nuts are also to be tightened manually.
With leveling leg lock nuts removed.
Tighten lock nuts securely when adjustments are complete.
Finger tighten the lock nuts.
Loosen the lock nuts on the feet by hand.
Water cooler element lock nuts.
Use lock nuts to secure the conduit tubes.
Quick to install with lock nuts.
Lock nuts holding blades to blade holders are loose.
Tighten on both sides using the lock nuts.
Remove lock nuts and washers from the handlebar.
See also
Prevailing torque hex lock nuts.
Tighten the lock nuts and check the alignment.
Stabilizer link with lock nuts.
Removal of lock nuts will require a new set for reinstallation.
Check that the leveling leg lock nuts are tightened.
Tighten the lock nuts and check the clearance again.
Secure the propellers using the provided lock nuts.
Remove the flange lock nuts from the deck.
Secure in place using the bolts and lock nuts.
Loosen hex bolts and lock nuts on two single brush.
Do not tighten extension plate bolts and lock nuts until.
The nylon lock nuts are designed to be used only once.
For your safety in some cases lock nuts were used.
Screws and lock nuts holding the engine and cover to the shield.
Remove the four carriage screws and flange lock nuts.
Reinstall the washer and lock nuts and tighten nuts securely.
Reassemble the back plate and secure with the lock nuts.
Then the trolley will not hit the lock nuts when it is installed.
Secure the assembly to the tank connections with the two bulkhead lock nuts.
Be sure to tighten the lock nuts when assembled to prevent the handle from rocking.
In this case you should use new lock nuts of same size.
Loosen the lock nuts under each back plate and slide the gibs out.
Attach the conduit connectors to the conduit plate with lock nuts then secure.
Remove lock nuts and screws securing one of the flange keepers to the chute assembly.
Rotate the control rod to lengthen the rod and tighten the lock nuts.
Remove the top two bolts and flange lock nuts from the handle mounting.
Metric Lock Nuts all bearings type.
Tighten all the anchor bolt nuts and the associated lock nuts before mounting the machines.
Tighten the lock nuts and re-assemble in reverse order.
Allen Button head with washers and lock nuts.
Tighten all 4 leveling leg lock nuts using the enclosed spanner.
Secure this setting with the two lock nuts A.
The reverse thread lock nuts should be replaced with a new one after every 15 uses.
After adjustment, tighten the lock nuts securely.
Be sure that the lock nuts on the U-bolt allow it sufficient play.
You'll also be interested in:
Examples of using Nuts
Show more
Soak nuts and seeds before blending
Tighten the small nuts with a spanner
Place nuts in recessed areas on front of handle
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
