Examples of 'lock pin' in a sentence
Meaning of "lock pin"
A lock pin is a mechanical device or fastener used to secure or immobilize objects, such as doors, gates, or machinery. It is designed to prevent unintended movement or access by inserting the pin into a corresponding locking mechanism or hole
How to use "lock pin" in a sentence
Basic
Advanced
lock pin
Models equipped with lock pin bushings.
Press the lock pin and secure the spindle.
Some kind of substance on the lock pin.
Confirm that the lock pin is disengaged by pushing.
Lock saw arm by depressing the lock pin.
The spindle lock pin is provided to pre vent.
Close retainer to secure lock pin.
Head assembly lock pin is engaged.
Refit the lock housing and lock pin.
Locate the lock pin under the handle.
Hold spindle from turning with spindle lock pin.
Remove the lock pin at the end of the shaft.
Lower the blade and engage the lock pin.
Do not push the lock pin while the spindle is running.
Insert the pin and set the lock pin.
See also
Engage spindle lock pin and tighten nut with wrench.
Close the access cover and remove the lock pin.
Make sure that the lock pin fits in the groove.
The lock pin moves up and down by turning the rotating knob.
The feet are closed and the leg lock pin inserted.
Ensure that the lock pin sets in its lowest position.
Lock pin two or three times before switching the power tool on.
Never depress the spindle lock pin while the blade is rotating.
The lock pin is located in a path of pivotal movement the operating lever.
Push down on saw arm and pull out the lock pin to.
Press the lock pin to secure the spindle and tighten.
Remove the drag stake and lock pin from the unit.
A sliding lock pin might be incorporated between two folding seats.
Preferably the lock mechanism comprises a lock pin and a lock notch.
Depress the lock pin lightly and pull the pusher to unhook it.
The tensioning device is locked by inserting a lock pin in a pair of registered holes.
Insert lock pin into the hole that achieves desired depth.
Attach the lanyard to the handle lock pin and the handle as shown.
Mount the lock pin and snap pin in in the right direction.
Do not attempt to engage the spindle lock pin until the spindle has stopped.
Pull the lock pin out of the drag stake mount hole.
CyberPoints are essentially cylinders without the lock pin mechanisms.
Ensure that the lock pin is not inserted into the armature.
Two piece lever holder and parking lock pin cc Model.
The lock pin according to the invention is consequently of the balanced type.
Install the guide cable and lock pin in the reverse order of removal.
The lock pin is retracted from the lock hole by an unlocking operation.
Using the Head Assembly lock pin.
Verify that the safety lock pin and rear securement knobs are in place.
To engage saw head lock pin A.
A door lock pin is disposed in a carrying handle of a breaker room front door lock.
Figure 7 is a partial front elevational view of the lock pin.
Pull out the lock pin and lift saw arm to its full height.
It includes a pressure-activated plunger assembly and a lock pin.
Remove the lock pin and take the inner tine set off the.
