Examples of 'lock position' in a sentence
Meaning of "lock position"
lock position - This phrase refers to securing or fixing something in place and preventing it from moving or changing position
How to use "lock position" in a sentence
Basic
Advanced
lock position
Lock position for toasting and gratinating.
Slide battery latch into lock position.
Final lock position procedure complete.
Rotate filter holder to full lock position.
Lock position and size.
Slide guide comb lock to lock position.
Lock position and jump.
The perimeter doors failsafe to a lock position.
Lock position adjusting projection.
Filter holder not rotated to full lock position.
Place levers in neutral lock position or adjust traction control switch.
Align the indication mark with lock position.
Lock position in block.
Put the set pin knob to the lock position.
Lock position sensor.
See also
Place the rotation selector in the centre lock position.
Do not leave lever in the lock position when brushes are raised.
Make sure the lock ring is in the lock position.
Body in lock position.
Position the hook so that it falls into the lock position.
The lock position of the locking pin is for carrying and storage only.
Make sure that the fuser levers are in the lock position.
The lock position of the plunger handle is for carrying and storage only.
Push the handle lock back into the lock position.
Sliding the switch fully to the lock position prevents calibration of the scale.
Twist the rotate the dust canister to the lock position.
Brake sliders to the lock position and confirm that the table is locked.
The windows close provided the key is held in the lock position.
Remove the hook from the lock position and turn it a quarter in a clockwise direction.
Push the locking tabs on the front wheels to the lock position.
Do not move the lever in the lock position while not mounting the attachment.
Lock all four swing locks by rotating them to the lock position.
Turn the key to the lock position once the light has stopped flashing.
Replace with new lens cap and rotate clockwise to lock position.
Put the set pin knob to the lock position and loosen the joint knob.
The windows close while the key is held in the lock position.
The tool MUST be in the lock position to install sandpaper pad.
Push and pull the handle to make sure handle is in a lock position.
The VPI is down and the lock position allows cooker to be opened.
Make sure the axle retainers snap into the lock position.
The lock position will not allow the cooker to be opened until the VPI drops.
Make sure your seat backs are in their upright and lock position.
Lock plate 5a lock position adjusting projection.
When the desired height is achieved return the collar to the lock position.
Hold the key in the lock position in the driver 's door lock.
Press in against the spring tension and twist into the lock position.
Lock position for 5 seconds and raise your hands to your chest.
Gently slide the unit down into the lock position of the keyholes.
Extremely accurate measurement of speed and detection of direction of rotation and lock position.
Move traction levers out to the neutral lock position and raise the seat.
You'll also be interested in:
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
