Examples of 'locking nut' in a sentence
Meaning of "locking nut"
A locking nut is a type of nut that is used to secure or fasten something tightly in place. It usually has a special design or mechanism that prevents it from loosening or coming off easily, providing added security and stability
How to use "locking nut" in a sentence
Basic
Advanced
locking nut
Tighten the locking nut only slightly.
Note that this is a self locking nut.
Tighten locking nut to secure bolt position.
Do not forget to lock the locking nut.
Turn the locking nut clockwise to lock.
Probe rod mount with locking nut.
Turn the locking nut clockwise to secure.
They come with a nylon locking nut.
Turn the locking nut counterclockwise until it is removed.
And then we have our locking nut.
Loosen the locking nut on the base of the.
After adjustment tighten locking nut.
Locking nut for angle adjustment.
Unlock the pump housing locking nut by turning it.
Turn the locking nut clockwise until it is locked.
See also
Secure the adjustment rod by tightening the locking nut.
The special locking nut does not turn freely.
Another type is a locking nut.
The self locking nut has to be securely screwed.
Next place the washer and locking nut on the shaft.
A locking nut is used to secure some types of cutting attachment.
Tighten the locking nut fingertight.
It not necessarily needs to have locking components like a locking nut.
Captive locking nut and screw.
The chain box is mounted with screw and self locking nut.
Place the locking nut onto the motor housing.
Assemble the clutch spring with adjusting nut and locking nut.
Open the grill locking nut on the guard loop.
A locking nut stops the vibrations before they reach the headstock.
Tighten the upper locking nut to lock the leveler.
The locking nut secures the cutting equipment on the output shaft.
Looks like there used to be a locking nut or something in there.
A second locking nut is then applied at each site to prevent loosening.
Press in while turning the locking nut clockwise and tighten.
A locking nut is used to exert pressure onto the rod securing sleeve.
Various mechanisms have been employed to lock or secure the locking nut in position.
Loosen the locking nut for the set screw.
The front fork inertia can be adjusted by tightening or untightening the locking nut.
Ensure the locking nut has not lost its captive.
Mount the concave recess side of the locking nut over the spindle.
Tighten the locking nut again to fixate the new adjustment.
Move to the required angle and lock by turning the locking nut clockwise.
Do not tighten the locking nut until a router bit is inserted.
Place a new blade on the axle and secure it using the locking nut.
Tighten the locking nut while holding the stop screw.
Secure them from the underside with a washer and a self locking nut.
Check that the locking nut of the cutting equipment is tightened correctly.
Guide the tool arm slowly upward and tighten the locking nut.
Tighten the locking nut for the set screw once more.
The clip is slipped over a sheet panel to thereby form a locking nut bore.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Locking
Show more
I am not locking the dog in the kitchen
Cylinder locks with custom locking system
A sturdy locking mechanism secures the displays
