Examples of 'locknut' in a sentence
Meaning of "locknut"
A locknut (noun) is a nut that resists loosening under vibrations and torque, commonly used to secure bolts in place
Show more definitions
- A nut with an inner ring made of a material with elastic properties to prevent it from slipping.
- A second nut, screwed down onto another in order to prevent it slipping.
How to use "locknut" in a sentence
Basic
Advanced
locknut
Tighten the locknut to secure the stop.
The adjustable foot must be fixed by a locknut.
No locknut is used on this type of rocker arm.
Loosen the brake linkage rod locknut.
Tighten the locknut to secure the adjustment.
Securely tighten the bolt and locknut.
Fit the locknut correctly to prevent water leaks.
Securely tighten with the existing locknut.
Tight the locknut correctly to prevent water leaks.
Fully back off the inner locknut.
Loosen the nut and locknut on the transmission.
Test adjustment and tighten the locknut.
Tighten the nut and locknut on the transmission.
Each extension element is immobilized by means of a locknut.
Install locknut and tighten with wrenches provided.
See also
Tighten the adjustment screw locknut when satisfactory.
Install locknut on electrical connector and tighten securely.
Now after that goes your locknut.
Install the locknut onto the mounting screw.
Till today you did not know what a locknut was.
Tighten each locknut against the cabinet top.
The adjusting screw was locked by a locknut.
Secure the locknut with the wrench provided.
Tighten fully onto piston before tightening the locknut against it.
Tighten locknut on the counterweight rod until it is locked.
You gotta use a locknut on that.
Locknut up to stop and tighten with one half of a turn.
An adjuster nut and locknut is used on some systems.
The locknut is secured to the shaft with a tab washer.
Bearing retaining locknut lockwasher.
Secure the locknut on the spindles with the wrench provided.
Lock the assembly with the serrated washer and locknut.
Loosen the locknut on the downward travel stop screw.
Engage the bottom gear and turn the sprocket locknut anticlockwise.
Remove the locknut and propeller from the drive shaft.
Assemble the inner bushing and locknut onto the machine shaft.
The locknut could no longer hold the jack on the seats.
Check that the bolt is through the bracket and the locknut is tight.
Tighten the locknut and test the tension in the steering lever.
Attach the cotter pin and brake spring to the locknut before installing it.
A locknut is typically used to drive the inner ring up a tapered shaft sleeve.
Until both the heads are flush with the face of the locknut.
The locknut assembly according to this first embodiment can be assembled as follows.
Use the large flat washer and locknut to secure the bolt on each end.
Loosen the locknut and screw to install at the desired angle and then retighten.
Secure the tine assembly to the tine shaft using the screw and locknut.
Traditional locknut systems can be difficult to use and require constant maintenance.
The product of this force and distance then yields the torque at the locknut.
Loosen the locknut and unscrew the adjuster just enough to allow the.
NOT all models of dishwashers have fill and drain hoses provided with locknut.
