Examples of 'long screws' in a sentence
Meaning of "long screws"
long screws are hardware fasteners with an elongated shaft, used to securely attach objects or materials together
How to use "long screws" in a sentence
Basic
Advanced
long screws
Long screws can be fastened without wobbling.
Use caution when inserting long screws.
Be careful when long screws are screwed in.
Insert and tighten the three long screws.
Tightening long screws during interior finishing work.
Do not use excessively long screws.
Be sure to use long screws to provide maximum support.
Attach the pedal unit using six long screws.
Remove long screws and lift press from wall.
These are also the black long screws as well.
Long screws for the front legs and pedal unit.
In case of tightening long screws there is a danger of slipping the drill.
The stacking switch should be assemble with two long screws.
Remove the four long screws from the face of the.
Attach the pedal unit supporting rod using the two long screws.
See also
Ensure that you use long screws to provide maximum support.
Slide handle assembly onto lower body and secure with two long screws.
Be certain that you use long screws to supply maximum support.
If attaching the grille from the outside of the case use the 2 long screws.
Take the long screws to connect the two legs with the middle bar.
Use short screws for flush bottom cabinets or long screws for recessed bottom cabinets.
Of the six long screws, use the long screws e that are.
Remove the two long screws Fd.
Install the exhaust connector on the back of the unit with three 16mm long screws.
Reinforced strikes and very long screws are a necessity to provide a reasonable degree of force protection.
Attach the two front legs using 4 long screws for each leg.
This kit of long screws - L - for suspension includes the new head.
Tightening in underwork material / Tightening long screws.
Use caution when inserting long screws - danger of slippage.
Securely attach the two appliances at the corners using the 14 long screws.
Take care when driving in long screws - risk of slipping.
SECURE the TOP frame to the legs with long screws 4.
Insert the 2 long screws on the outside.
Install the 2 remaining long screws.
With long, long screws that go deep, deep into the ground?
Use here the 4 long screws.
With really long, long screws that go deep, deep into the ground?
Fasten front cover to heater assembly using the ( 2 ) long screws supplied.
Install ( 2 ) 4mm x 38mm long screws into the holes inside the hood and tighten them securely.
Temporarily mount your Xtant amplifier using the four ( 4 ) long screws provided.
Secure those using two 1-inch long screws and the mechanical screwdriver.
Yeah, I had to use a buncha big, long screws.
Secure Press to wall with long screws ( Diagram 4 ), DO NOT tighten screws.
Mount the grille using four ( 4 ) long screws provided.
You'll also be interested in:
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Long
Show more
One in a long line of successful cop marriages
But you will not be for long
Seems a terrible long distance up that hill
