Examples of 'looper thread' in a sentence
Meaning of "looper thread"
A looper thread refers to a separate thread of execution that continuously runs in a loop. It is commonly used in programming to perform repetitive tasks without blocking the main thread
How to use "looper thread" in a sentence
Basic
Advanced
looper thread
The looper thread is loose on the underside.
Tighten the upper looper thread tension.
Upper looper thread tension is too loose.
Then thread the lower looper thread.
Upper looper thread tension adjusting dialA.
Thread and the lower looper thread.
Lower looper thread tension dial.
Threading the upper looper thread red.
Upper looper thread tension dial.
Threading the lower looper thread yellow.
Looper thread guide in the direction of.
Pass the thread through upper looper thread guide.
The needle or looper thread tension is too tight.
The distance from the end of the looper thread take.
If the upper looper thread breaks during sewing.
See also
Turn the machine pulley until the end of the looper thread.
The looper thread covers and neatens the seam on wrong side.
Turn the thread tension nut q to adjust the tension of the looper thread.
Make sure that the looper thread cam releases the looper thread.
Turn the thread tension selector for the lower looper thread u yellow.
The lower looper thread runs as a straight line along the fabric edge.
Chain stitch is formed with one chain looper thread and one needle thread.
Upper looper thread Lower looper thread.
Take up any slack in the needle thread and looper thread along the thread paths.
Looper thread guide Changeable thread guide.
The illustration shows the sewing results when the upper looper thread tension is too loose.
Upper looper thread guide Upper looper.
Wrong side of fabric Needle thread Right side of fabric Lower looper thread.
The needle and / or looper thread tensions are.
Lower looper Needle thread Lower looper thread.
Looper thread tension is out of balance 2.
Then lift up the lower looper thread guide 1.
When the looper thread take-up q is at its highest posi.
Pass the thread through the lower looper thread guide 1.
The looper thread take-up is installed in the following position.
Pass the thread through the looper thread take-up lever lower.
Raise looper thread cam thread guide 1 and perform threading.
Pass the thread through the looper thread take-up lever upper.
The lower looper thread is firm and / or the upper looper thread is loose.
The coil-type slide fastener further comprises a needle thread and a looper thread.
Positioning the looper thread take-up and thread guides.
Remedy, Loosen needle thread tension and / or tighten lower looper thread tension.
The needle and / or looper thread tensions are not correctly adjusted.
To decrease the amount of thread, move looper thread take-up.
If the upper looper thread is broken, remove the looper to lowest position.
When all threads are threaded, and the lower looper thread loosens itself, proceed as follows.
Loosen upper looper thread tension and / or tighten lower looper thread tension.
Remedy, Tighten the upper looper thread tension.
Loosen the lower looper thread tension and / or tighten the upper looper thread tension.
Figure 19 shows the thread path of the lower looper thread.
You'll also be interested in:
Examples of using Looper
Show more
The looper thread is loose on the underside
Tighten the upper looper thread tension
Upper looper thread tension is too loose
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
