Examples of 'thread' in a sentence
Meaning of "thread"
thread (noun): A long, thin strand of cotton, nylon, or other fibers used in sewing or weaving. It can also refer to a theme or topic running through a conversation, narrative, or piece of writing
Show more definitions
- A long, thin and flexible form of material, generally with a round cross-section, used in sewing, weaving or in the construction of string.
- A continued theme or idea.
- A screw thread.
- A sequence of connections.
How to use "thread" in a sentence
Basic
Advanced
thread
Insert washer and thread nut to screw.
Thread mount available for optional accessories.
Put a spool of thread on the spool pin.
Thread the tip on to the screw carefully.
Changing the thread catcher see fig.
Thread first thread as usual following threading.
We can get a thread put on it for you.
Thread each needle from front to back.
There is a blue thread caught in the shifter.
Thread machine with first thread color.
The delicate thread between us had snapped.
Thread of accessory must match thread of spindle.
Wind bobbin thread onto these bobbins.
Thread acronyms are depicted in the following table.
Replacing the thread catchers see fig.
See also
Thread the ends on the elevator pushrod.
I will give a thread chanting some recitations.
Thread straps through handles when possible.
They are the thread count of a paper towel.
Thread a screw into the wing rod.
Pass the holy thread around in circle.
Rethread the upper thread and bobbin.
Place a spool of thread on the spool pin.
Use thread lock on all the screws.
Proceed as follows if the thread needs to be wound up.
The thread count on the new sheets.
Do not lose the thread of your thought.
The thread is caught under the hook e.
I am matching the thread color to the dress.
Thread the wheel on the spindle by hand.
Reduce the top thread tension slightly.
Thread spool does not have sufficient line.
There is not a thread of good in any of them.
Thread rolling dies for screw manufacturing.
Adjust upper thread tension higher number.
Pus had formed under the thread.
And the thread count on these sheets.
The valves have an external spindle thread.
The needle thread tension is too tight.
The valves have an internal spindle thread.
The needle thread is not threaded properly.
Cryotubes with external thread screw cap.
The bobbin thread tension is too high.
The man likes a high thread count.
The needle thread tension is too loose.
Needle too thin for thread used.
The bobbin thread is caught in the hook.
Check the positions of each thread path.
Check if thread is lying between tension discs.
Three questions serve as the guiding thread.
