Examples of 'lower blade guard' in a sentence
Meaning of "lower blade guard"
lower blade guard - A safety component on tools like saws or lawnmowers designed to protect the user from the cutting blade
How to use "lower blade guard" in a sentence
Basic
Advanced
lower blade guard
The lower blade guard is a safety feature which.
Never wedge or tie lower blade guard open.
Lower blade guard retracting lever g.
Grasp the lower blade guard.
Lower blade guard is in up position when making a cut b.
When retracting the lower blade guard to install.
Lower blade guard will not return to locked position.
Connect the link to the lower blade guard.
Close lower blade guard cover.
Check the operation of the lower blade guard.
Never tie the lower blade guard in a raised position.
The blade should not foul the lower blade guard.
Raise the lower blade guard to its highest position.
Open lower cover door and the lower blade guard.
Check that the lower blade guard is moving correctly.
See also
Check for interference between the auxiliary fence and lower blade guard.
Check operation of lower blade guard before each use.
The lower blade guard is a safety feature which reduces the risk of.
Fit saw blade inside lower blade guard and onto spindle.
The lower blade guard is attached to the saw for your protection.
Fit the saw blade inside the lower blade guard and.
Rotate lower blade guard up and loosen blade bolt cover.
Replace the blade bolt cover and the lower blade guard in position.
Replace the lower blade guard and the blade bolt.
Never extend your fingers while holding the lower blade guard handle.
Then raise the lower blade guard as far as possible.
Always make sure nothing interferes with the movement of the lower blade guard.
Move the lower blade guard back to cover the blade.
Check the condition and operation of the lower blade guard as previously outlined.
Check the lower blade guard to ensure that it is in working order.
Carefully ease the blade into position and release the lower blade guard.
Do not operate if lower blade guard does not close briskly over saw blade.
Use the following guidelines to eliminate potential hazards with the lower blade guard.
Be sure the lower blade guard is closed before putting the saw down.
Using the retracting lever, retract lower blade guard to an upward.
Check lower blade guard for proper closing before each use as outlined in.
Close lower cover only when the lower blade guard is in its closed position.
The lower blade guard helps protect your hands from the spinning blade.
Fit the saw blade inside the lower blade guard and onto the spindle.
The lower blade guard is a safety feature that reduces the risk of serious personal injury.
Slowly release the lower blade guard retracting lever C.
Lower blade guard C used in the miter saw mode only.
Make sure that the lower blade guard C is installed on.
The lower blade guard is designed to close quickly when the lever 2 is released.
Be sure to install the lower blade guard C before using.
The lower blade guard B rises as it contacts a workpiece.
To attach blade, retract lower blade guard and place blade over.
Before use in the table saw mode, remove the lower blade guard C.
Do not rely on the lower blade guard to protect you under all circumstances.
This can be corrected by adjusting nut ( B ) until the lower blade guard moves freely.
You'll also be interested in:
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
Examples of using Lower
Show more
Lower school enrolment for disadvantaged children
Fractures to the lower legs and feet
Lower right hand corner is the number
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
