Examples of 'upper blade guard' in a sentence
Meaning of "upper blade guard"
upper blade guard: This phrase refers to a protective cover or shield located above a blade, typically on a tool or piece of equipment. It is used to prevent accidents or injuries by covering the upper part of a blade and providing a barrier between the blade and the user
How to use "upper blade guard" in a sentence
Basic
Advanced
upper blade guard
Adjust the height of the upper blade guard as necessary.
Keep the upper blade guard as close to the workpiece as possible.
Locate depth of cut scale on back of upper blade guard.
Please check the upper blade guard on your circular saw.
It fits over the exhaust port on the upper blade guard.
Return the upper blade guard to its service position and.
Always transport the machine with the upper blade guard fi tted.
It retracts over the upper blade guard as the saw is lowered into the workpiece.
Orient adaptor to fit into the dust chute opening on upper blade guard.
Remove the upper blade guard 6.
The adaptor fits over the dust chute which is located on the upper blade guard.
Mounting the upper blade guard fig . P.
Always transport your saw in saw bench mode with the upper blade guard fitted.
Fitting the upper blade guard fig . P.
Workpiece together with the fence assembly until the workpiece comes underneath the upper blade guard.
See also
Fitting the upper blade guard fi g. N.
For more depth of cut accuracy, a scale is located on the upper blade guard.
Mounting the upper blade guard fi g. E.
WArNING, Always transport the machine in saw bench mode with the upper blade guard fitted.
The upper blade guard ( 25 ) is designed to be quickly and easily.
Never use the machine without having the upper blade guard in place.
Secure the upper blade guard ( 29 ) to the riving knife by pulling the.
Align the two halves of the dust extraction spout ( y ) over upper blade guard ( l ) as shown.
Replace the upper blade guard ( 6 ) and tighten the two Phillips screws 5.
Lower blade guard 25 is pivotally attached to upper blade guard 27.
Upper Blade Guard - Supports the motor, handle, switch, blade and lower guard.
Preferably the motor 24 is attached to the upper blade guard 17.
Mounting the upper blade guard fig . C9.
Retract the lower blade guard ( 15 ) all the way up into the upper blade guard 5.
You'll also be interested in:
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
Examples of using Upper
Show more
Put the upper plate on the stove
Put light items in the upper basket
The upper section has an internal tongue
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
