Examples of 'lower thread' in a sentence
Meaning of "lower thread"
lower thread: Refers to the bottom thread in a sewing machine or similar device used for stitching fabrics
How to use "lower thread" in a sentence
Basic
Advanced
lower thread
The lower thread tension is too tight.
Adjust the upper thread or lower thread tension.
Lower thread is tangled at the sewing start.
Tension of lower thread is too tight.
Lower thread winding will then start.
Incorrect threading of upper or lower thread.
Pull the lower thread to create pleats.
Replaced our sheets with lower thread counts.
Upper or lower thread tension is too tight.
This second thread is called the lower thread.
Loosen lower thread tension as described.
The sewing machine works with an upper and a lower thread.
Draw up the lower thread before starting sewing.
Incorrect thread tr imming upper thread or lower thread is not being trimmed.
Make the lower thread tension as weak as possible.
See also
Proceed down left channel and through the lower thread guide t.
The lower thread is not properly threaded or is broken.
The upper thread should have caught the lower thread in a loop.
The lower thread is tangled or breaks.
Loosen the tension of the upper thread so that the lower thread.
Pick up lower thread then make two or three stitches.
Pull the upper thread slowly and the lower thread will be brought up in a loop.
The lower thread tension has already been adjusted at the factory for general use.
Turn the upper shaft pulley and check the condition of the lower thread.
Proceed down to the lower thread guide i and pull thread left.
I was worried Constance might have secretly replaced our sheets with lower thread counts.
The amount of lower thread remaining will be larger if a larger value is set.
Turn the hand wheel towards you to bring up the lower thread through the fabric.
Adjust the lower thread tension plate clearance of the upper thread nipper correctly.
Remove the screw q, and then remove the lower thread.
Draw on the end of the lower thread in the direction of the sewing foot.
Is the bobbin spinning direction correct when the lower thread is being pulled?
The pitch of the lower thread surface in the first region is preferably substantially constant.
After the thread is trimmed, the amount of lower thread remaining will be displayed.
Pull out lower thread by turning handwheel towards you while holding upper thread lightly.
Once winding of the lower thread is completed, the.
The lower thread tension has already been adjusted, do not.
Increase the tension of the lower thread at the bobbin, using a small.
Is the lower thread tension too weak, or is the upper thread tension too strong?
Easily pull up the upper thread, the lower thread will be brought up in a loop.
If the lower thread is incorrectly threaded, instead.
The lugs may be integral with the lower thread surface, or spaced therefrom.
To avoid lower thread from being pulled up, reduce upper thread tension.
Gently pull the upper thread, and the lower thread will come.
Upper thread tension too weak Lower thread tension too strong Increase the upper thread tension.
After you finish sewing, check if the upper thread and lower thread are equal.
Upper thread tension too strong Lower thread tension too weak Decrease the upper thread tension.
Preferably, the second region is adjacent to the first region of the lower thread surface.
The amount of lower thread will be displayed in AB of the LED display.
Pass the thread through the slot 0 and under the lower thread adjustment spring.
You'll also be interested in:
Examples of using Lower
Show more
Lower school enrolment for disadvantaged children
Fractures to the lower legs and feet
Lower right hand corner is the number
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
