Examples of 'machine pulley' in a sentence
Meaning of "machine pulley"
A machine pulley is a mechanical device consisting of a wheel with a grooved rim and a central axle that is used to transfer motion or transmit power between rotating shafts or belts. It is commonly used in various machines and mechanisms, such as engine systems, conveyor belts, and lifting equipment, to change the direction or speed of rotational movement
How to use "machine pulley" in a sentence
Basic
Advanced
machine pulley
Fit the belt on to the machine pulley.
Turn the machine pulley to raise the needle bar to its.
Pass the screwdriver through the hole in the machine pulley.
Turn the machine pulley to set the needle bar q to its.
Fit the V bel t onto the sewing machine pulley.
Turn the machine pulley to raise the needle bar q from.
Fit the belt to the machine pulley and after that.
The machine pulley and V-belt are covered with the belt cover.
The numbers marked on the machine pulley indicate the approximate stitch length in millimeters.
The machine pulley should turn clockwise as seen from the machine pulley . Fig.4.
The more you turn the machine pulley toward yourself, the smaller the feed will be.
The machine pulley rotates clockwise as seen from the end of the machine pulley . Fig.8.
Turn the machine pulley until the end of the looper thread.
Turn the machine pulley to raise the needle to its highest position.
Turn the machine pulley to set the needle bar to its highest positon.
See also
Turn the machine pulley to set the needle bar q to its lowest position.
Turn the machine pulley to drop the needle bar to its lowest position.
Turn the machine pulley until the needle is at the top of its stroke.
Turn the machine pulley to raise the needle until it is above the needle plate.
Turn the machine pulley until the upper knife holder is at its lowest position.
Turn the sewing machine pulley until the needle bar reaches its highest position.
The main machine pulley 5 is keyed to a first primary drive shaft 6.
Turn the machine pulley until needle clamp ( 1 ) is raised to the highest position.
Turn the machine pulley and raise the thread take-up ( 1 ) before threading the upper thread.
Turn the machine pulley until the needle bar ( 11 ) is raised to the highest position.
Turn the machine pulley ( 5 ) toward yourself until loopers ( 1 ) reach the end of their backward travel.
You'll also be interested in:
Examples of using Pulley
Show more
Rotate the pulley to be sure it spins freely
Check for a damaged belt or damaged pulley
Pulley and idler not in correct adjustment
Examples of using Machine
Show more
Electric machine model parameters and interface
The virus is effectively a machine run by a computer
The machine is sold without water softener
