Examples of 'machine screws' in a sentence
Meaning of "machine screws"
screws specifically designed for use in machinery or equipment, typically used to fasten metal parts together
Show more definitions
- plural of machine screw
How to use "machine screws" in a sentence
Basic
Advanced
machine screws
Machine screws should be started off gently.
Better than buying the machine screws.
Machine screws of different lengths can be provided.
And then the time machine screws up again.
Screw machine screws lightly into the thread.
Four flat head wood screws or machine screws.
The new machine screws up when you least expect it.
Do not use this tool to drive machine screws or bolts.
Machine screws are a subcategory of screws used to attach pieces of machinery together.
Driving of wood screw and machine screws with the.
Remove the two machine screws holding the light reflector in place.
Install wall control unit to outlet box using machine screws provided.
Go back and tighten machine screws at bottom of uprights and braces.
It is ideal for light applications such as cabinet hinge screws or machine screws.
Four flat head wood screws or machine screws with washers.
See also
These are machine screws are used for attaching decorative hardware in cabinets and furniture.
Most types are designed for either machine screws or sheet metal screws.
The housing can be provided with threaded bores to engage machine screws.
X Machine screws fixing baffles to wall frames.
I wish I tapped the holes and used machine screws.
Reinstall machine screws at lower left and right side of control panel with a Phillips.
Fasten a piece of wood. by means of machine screws or.
Loosen the 2 machine screws and replace the die.
These may be attached to the forme by countersunk machine screws as illustrated at 18.
Various bolts and machine screws - see pictures for specifications.
The baffle is secured to the wall frame by 4 machine screws in the corners.
In addition, two machine screws are included to attach the unit to an electrical box.
Install the hinge using the 6 machine screws removed earlier.
Machine screws with flat washers, spring washers and nuts for frame.
Various types of Machine Screws are displayed.
Lift off the back cover and set it aside, along with the four machine screws.
Various kinds of Machine Screws available.
The panel will be held on by 6 sheet metal screws and 2 machine screws.
Case 8 may be fixed with machine screws or caulkings accordingly.
Inner machine screws 692 pass through a series of aligned bores and apertures.
Use the four supplied flat-head machine screws as shown in the illustration.
Fasten the support frame to the support frame bracket with ( 4 ) machine screws.
Various screws, machine screws and air gun nails - see pictures for specifications.
For this, screw out the 4 pre-assembled machine screws from the clamp.
Remove the 6 machine screws from the hinge and the 2 machine screws from the hinge cover.
Tighten the ( 4 ) mounting bracket machine screws previously installed.
The screwdriver has a high-speed, low-torque transmission specifically designed for long machine screws.
Four flat-head wood screws or machine screws with washers and nuts to attach filler strips.
Typical fasteners are T-nuts and pan-head machine screws.
The chimney is attached using M4 machine screws which can be accessed through the filter openings.
Attach the motor mount to the motor using the four M3 x 15 washer head machine screws.
M6 machine screws screwed into the TV 's rear cover.
Attach the “ S ” hooks and reinsert the machine screws.
Use the machine screws ( AA ) to secure the fixture onto the mounting bracket.
Hold the fixture ( A ) in place and tighten the machine screws AA.
You'll also be interested in:
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Machine
Show more
Electric machine model parameters and interface
The virus is effectively a machine run by a computer
The machine is sold without water softener
