Examples of 'male threads' in a sentence
Meaning of "male threads"
In the context of engineering or mechanics, male threads refer to the external threads on a screw or bolt. They are designed to fit into a corresponding female threaded hole or nut, creating a secure connection between two parts
How to use "male threads" in a sentence
Basic
Advanced
male threads
Use threading compound on male threads only.
Male threads are capped for protection.
Use joint compound on male threads only.
Male threads on the outside.
Use thread sealant on all male threads.
Male threads allow the valves to be easily installed and removed from the system.
Housing with female and male threads.
The female threads are on the inside, and the male threads are on the outside.
Apply sealant to male threads only.
The engagement mechanism can be a female threaded cavity or male threads.
A chase nipple has male threads on one end only.
Use pipe joint compound sparingly on male threads.
The tube other end has male threads for connection to a water-use point.
Apply sealant sparingly to the male threads only.
The part 5 with male threads tends to expand the plastic body 2 of the pipe fitting 1.
See also
A pin refers to a joint component having male threads.
Male threads are then cut at each end of the pipe ( either NPT or BSPT ).
Use pipe joint compound on all nonflared male threads.
In the preferred embodiment, male threads 36 are used to mount the assembly on needle holder 34.
Apply a good quality pipe compound to all male threads.
The slider 2722 includes integrally molded male threads ( used for forehead support depth adjustment ).
The other side of the outlet coupling had male threads.
The male threads 34 may be configured to mate with a threaded hole 36 FIGS.
Use a pipe joint compound on the male threads of the metal pipe.
Pipe dope must be resistant to propane and applied sparingly to all male threads.
Connect air hose with the male threads of the filter C.
The groove has a depth h g at most equal to the height of the male threads.
Housing 18 also includes a plurality of male threads 90 at the distal end thereof.
For propane / LP installations, apply pipe joint sealant lightly to male threads.
Screw connections with weld ends and male threads - conically sealing, PN 16.
Add sections of pipe as needed, using Teflon tape on the male threads.
Apply a minimum amount of pipe compound to the male threads of the fitting only.
To prevent gas leaks, put a pipe joint sealant or Teflon tape on all male threads.
In addition, trapezoidal threads are used for the male threads 18 and the female threads 17.
In the modification, threads 36 ′ provided at a proximal end of a connector 12 comprise male threads.
Check tank valve to ensure it has proper external male threads type I connection per ANSI.
As indicated in FIG . 2, the reservoir 4 has an opening surrounded by a neck 22 with male threads.
Check tank valve to assure it has proper external male threads type 1 connection per ANSIZ21.81.
Be sure to use pipe joint compound, or plumber 's seal tape on all male threads.
Use Teflon tape on male threads.
Preferably, both ends of the studs 56 are provided with male threads.
Prior to installation, apply pipe compound to all male threads as shown in Figure 1.
They comprise a load flank 14 mating with the load flank 13 of male threads 3.
Join a 3/8 " NPT pipe elbow ( locally available ) to the male threads at the manifold entrance.
Apply pipe compound or Teflon tape to all male threads.
A threaded locking collar 365 is then screwed onto the exposed male threads of the cyclone housing.
Pipe-joint compound or tape shall be applied on the male threads only.
You'll also be interested in:
Examples of using Threads
Show more
Threads have been caught in the hook area
Remove the threads and hairs with
Threads must neither be oiled nor greased
Examples of using Male
Show more
A taken male instantly becomes an unavailable male
Special programmes to increase male involvement in reproductive
These male witches are the worst kind
