Examples of 'threads' in a sentence
Meaning of "threads"
A thread refers to a long, thin strand of cotton, nylon, or other fibers used in sewing or weaving to join fabric together. Threads are essential components in textile and garment production
Show more definitions
- plural of thread
- Clothes.
- third-person singular simple present indicative form of thread
How to use "threads" in a sentence
Basic
Advanced
threads
Threads have been caught in the hook area.
Remove the threads and hairs with.
Threads must neither be oiled nor greased.
Apply sealant tape to threads of exposed fittings.
Fine threads for more holding strength.
Spectrum from fixing threads to gauge accuracy.
The threads of endearment are entangled in your fingers.
Only use decorative threads in the loopers.
Cutting threads to profile girders not required.
You have fibers and threads unknown to us.
The threads have been lubricated to facilitate removal.
Check condition of threads in cylinder head and on.
Threads that little barrel and exits.
Secure the threads at the other end.
Threads connecting pages of document with a cover.
See also
Lubricate the threads of the regulator valve.
Threads of plastic materials for textile use.
Cover pipe threads with leak sealant.
Threads kink together under the fabric.
Check that the threads are threaded correctly.
Threads would not dare to take us lightly.
There is a risk of the threads being pulled out.
For threads which do not slide easily.
Hold back both threads when starting.
The threads are already supplied with a lubricant.
Woven fabrics of metal threads or of metallised yarn.
The threads are still frayed straight out.
Woven fabrics of metal threads or of metallized yarn.
All threads can be cut in a single pass.
Upper and bobbin threads should lock.
These threads ai not about the cruise.
If your faucet has threads on the outside.
The threads of this strange case again.
Unthread the two threads of the needles.
The threads are dampened and covered with.
The length of these threads is almost unbelievable.
The threads are still attached to the nails.
Cut through the threads with scissors.
He threads around the three conveyor sections.
Ves fluff and threads from textiles.
Use threading compound on male threads only.
Cut any threads or hairs that have.
Also apply grease to the collet threads.
Different threads leading up to the same tangle.
Do not over tighten to prevent stripping of threads.
Clean all threads and sealing surfaces.
There is your tunic with threads of gold.
Cut the threads or hair using a pair of.
Do not put threading compound on these threads.
Expand all threads in the current folder.
