Examples of 'may be soldered' in a sentence
Meaning of "may be soldered"
may be soldered: This phrase suggests the possibility of two or more metal components being joined together using a soldering technique. It implies the potential for a connection to be made through the process of soldering
How to use "may be soldered" in a sentence
Basic
Advanced
may be soldered
The element may be soldered to the substrate.
Alternatively, the ends of the strip may be soldered together.
Internal fuses may be soldered and may not be easily replaceable.
Alternatively, the wire between adjacent panels may be soldered to each panel.
The assembly may be soldered subsequently.
The metal plate 5, the walls 4 and the base 3 may be soldered.
It may be soldered onto the valve or connected by some other means.
In all cases the temple may be soldered to the insert.
This chip may be soldered or bonded with a conductive glue on the conductive surface 3 b.
For example, the terminals may be soldered or welded together.
They may be soldered to, or otherwise connect to, other traces.
Alternatively, the bared end of the wire may be soldered to the terminal leg 56.
Bulk capacitors may be soldered between the octagonal ring ( or other shaped ) elements.
As a variant, the diodes may be soldered or glued onto the plate.
Each plate 19 may be soldered to one of the two adjacent tubes defining a second channel.
See also
In a variant, said electric wire may be soldered or crimped directly to the connector.
They also may be soldered or welded to the secondary winding 14a.
Electronic components may be soldered on both surfaces of the printed circuit.
Male terminals 6 may be soldered to discrete conductors instead of conductors on printed board 10.
For example, each conductor may be soldered to a respective contact in the usual manner.
The balls 8 a may be soldered or bonded, preferably soldered, on the circuit 6.
A wire so placed may be soldered to conductor 41.
The switch 20 may be soldered to the CPC circuit ( printed circuit board ).
The ground area 8 may be soldered to a support ( not shown ).
Preferably, the capacitors may be soldered directly to the terminal portions of the commutator segments.
Alternatively, cables may be soldered or welded directly to the pump and the PCB.
You'll also be interested in:
Examples of using Soldered
Show more
The coffin was soldered without a vent hole
Soldered memory can not be easily upgraded
Cable must be soldered into the contacts
Examples of using May
Show more
I may decide to teach you something tomorrow
Of these uses oratory may serve as an illustration
This may be helpful if network problems occur
