Examples of 'measure the voltage' in a sentence
Meaning of "measure the voltage"
measure the voltage - This phrase is commonly used in the context of electrical engineering or physics, referring to the act of determining the electric potential difference between two points in a circuit
How to use "measure the voltage" in a sentence
Basic
Advanced
measure the voltage
How to measure the voltage in the mains.
Then use a voltmeter to measure the voltage.
Measure the voltage across the battery terminals.
Use a suitable voltmeter to measure the voltage on the battery.
Measure the voltage output again.
First you need to measure the voltage on the battery.
Measure the voltage at the battery and at the charger.
Use a suitable multimeter to measure the voltage at the battery clamps.
Measure the voltage on the input terminals of the electric chain hoist.
Use a suitable voltmeter to measure the voltage on the battery after charging.
Measure the voltage on the receiver and compare the value with the table below.
Measuring system configured to measure the voltage at the terminals of the layers.
Measure the voltage after the battery has not been charged or discharged for several hours.
Such electrical detection means measure the voltage peaks generated by partial discharges.
The two outer probes apply a constant current and two inner probes measure the voltage.
See also
I want you to measure the voltage on the battery.
I could show you . And if I had a device that could measure the voltage.
Always measure the voltage before touching and ground.
Is there any sensors to measure the voltage and current?
Measure the voltage and frequency of AC grid.
The better option is to measure the voltage drop when the engine is cranked.
Measure the voltage drop between said first metallic element and said second metallic element ;.
The two inner pairs of electrodes measure the voltage drop along the current flow path.
To measure the voltage of a single point, a reference point must be selected to measure against.
Would it be sufficient to measure the voltage of each phase to find out?
Measure the voltage between the positive terminal and the ground potential ( PE ).
It 's common to grab a meter and begin to quickly measure the voltage between two pins.
At the same time measure the voltage between the battery poles.
The analog input IN 0 is used to measure the voltage URA.
It is also possible to measure the voltage V bat when the current I d is flowing.
Using a Digital Multi-Meter measure the voltage between.
Measure the voltage between the negative terminal and the ground potential ( PE ).
Check the electrolyte level, and measure the voltage and specific gravity of the battery.
Measure the voltage at the clamps, 0 volt melted fuse.
With LCD, it can also measure the voltage of the socket and display it.
Measure the voltage between the pin and ground, you will get 5 volts.
Trial operation and testing 1 Measure the voltage at the primary side of the safety breaker.
Measure the voltage ( RMS ) between phase and neutral.
If the problem persists, measure the voltage using a digital multi -.
To measure the voltage of the capacitor before, during, and after discharging, use a multimeter.
In operation, the microprocessor 82 would measure the voltage of the temperature sensor as described above.
Measure the voltage at MP 34 with the digital voltmeter and note it down.
Measuring means 26 are configured to measure the voltage V bat at the terminals of battery 13.
You measure the voltage drop across a light bulb with resistance 100 Ω and get a result of 80V.
In the following 0.5 milliseconds, we measure the voltage drop at full load and decide.
Always measure the voltage ( AC + DC ) before testing the insulation.
Similarly, the voltage sensor 32 is used to measure the voltage output of the solar panels 10.
Advantageously, in order to measure the voltage difference, the device comprises two voltage dividers 33 and 34.
Furthermore, a voltage sensor 5 is arranged so that it can measure the voltage between the lines 6a, 6b.
It is not trivial to measure the voltage drop across a switching MOSFET.
You'll also be interested in:
Examples of using Measure
Show more
It was an emergency measure but overcrowding is still a problem
Measure the difference between the markings
The unit of measure for water pressure
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
