Examples of 'measuring the absorbance' in a sentence
Meaning of "measuring the absorbance"
measuring the absorbance: In the field of chemistry and biology, absorbance refers to the amount of light or radiation absorbed by a material. Measuring the absorbance involves using a spectrophotometer or a similar device to quantify the amount of light absorbed by a substance at a particular wavelength
How to use "measuring the absorbance" in a sentence
Basic
Advanced
measuring the absorbance
Measuring the absorbance of the sample.
The colour change was studied by measuring the absorbance at two different wavelengths.
Measuring the absorbance of a solution.
Mixed together rapidly and observed the kinetics by measuring the absorbance as a function of time.
When measuring the absorbance use the same cell for samples and standard solutions.
The reaction is evaluated by colorimetry ( by measuring the absorbance by spectrophotometry ).
Measuring the absorbance of the stabilized mixture ;.
In another embodiment, the detection step comprises measuring the absorbance of the compound.
Measuring the absorbance of the solution at 2 or more wavelengths.
The cell density was recorded by measuring the absorbance at 600 nm.
Measuring the absorbance of said sample to electromagnetic radiation ; and.
Free p-nitrophenol was quantified by measuring the absorbance at 400 nm by a spectrophotometer.
By measuring the absorbance of such agglutination, human megalin can be quantified.
Collected fractions were analyzed in a spectrophotometer by measuring the absorbance at 280 nm.
The waiting time before measuring the absorbance varies from 5 to 30 min.
See also
Finally, the RNAs were quantified by spectrophotometrically measuring the absorbance at 260 nm.
Flow throughs were detected by measuring the absorbance at 260 nm using a UV spectrophotometer.
So this 540 nanometers is the wavelength of light that we are measuring the absorbance of.
The assay was conducted by measuring the absorbance at a wave length of 405 nm.
Again, plate was washed, and avidin / biotin was added for measuring the absorbance.
Tubulin polymerization was followed by measuring the absorbance of the solution at 340 nm over time.
After washing, binding was quantitated using the substrate p-nitrophenylphosphate and measuring the absorbance at 405 nm.
An amount of dye was determined by measuring the absorbance at 620 nm of the filtrate.
Iv measuring the absorbance was measured at 620 nm.
The elution profile was monitored by measuring the absorbance at 280 nm.
MICs were obtained by measuring the absorbance at 450 nm with a microtitration plate reader.
A spectrophotometer or colorimeter suitable for measuring the absorbance at about 550 nm.
Figure 17 is a graph measuring the absorbance of a Levofloxacin solution at 257 nm vs pH.
The percentage of living cells was determined by measuring the absorbance at 405 nm.
Quantification was achieved by measuring the absorbance of Alizarin Red ( ODAR ) after extraction with 10 % cetylpyridiniumchloride.
The fractions containing lectin were selected by measuring the absorbance at 280 nM.
The protein peaks are detected by measuring the absorbance value at the wavelength of 280 nanometers.
Wells were incubated with p - nitrophenyl phosphate and monitored by measuring the absorbance at 405 nm.
Separations were monitored by measuring the absorbance ( at 280 nm ) of eluted fractions.
Binding was visualized by adding substrate ( p-nitrophenylphosphate ) and measuring the absorbance at 410 nm.
Various linear gradients were used measuring the absorbance at 230 nm and collecting 40 ml fraction.
After 20 minutes, the hydrolysis of substrate was determined by measuring the absorbance at 405nm.
Fmoc release was quantified by measuring the absorbance ( 302 nm ) of piperidine solution and combined washes.
The concentration of crude oligomer was then determined by measuring the absorbance at 260 nm.
The elution pattern was monitored by measuring the absorbance of the fractions at 280 nm.
The results are in agreement with spectrophotometer data measuring the absorbance at 480 nm.
Polysome profiles were monitored by measuring the absorbance at 260 nm using a flow cell.
The iron saturation of the preparations was checked by measuring the absorbance at 465 nm.
The elution profile was recorded by measuring the absorbance at 220 nm.
The rHSA-containing fraction thus eluted was detected by measuring the absorbance at 280 nm.
The concentration is determined by measuring the absorbance of this gas at 253.7 nm.
The concentration of BSP in bile samples was determined by measuring the absorbance at 580 nm.
Proteins were detected by measuring the absorbance at 280 nm.
The concentration of the reduced Nanobody ™ was measured by measuring the Absorbance at 280nm.
The elution profile is followed by measuring the absorbance at 280 nm of eluate.
You'll also be interested in:
Examples of using Measuring
Show more
Method of measuring the response time on vehicles
Manufacturer of the separate temperature measuring equipment
The measuring instrument is not water tight
Examples of using Absorbance
Show more
Absorbance ratio of colour bound by phosphoryl cellulose
You measure absorbance just like that
Absorbance of the measuring solution at the maximum
