Examples of 'megapascals' in a sentence
Meaning of "megapascals"
Megapascals: a unit of pressure equal to one million pascals, used in measuring the tensile strength of materials. For example, 'The material has a tensile strength of 50 megapascals.'
Show more definitions
- plural of megapascal
How to use "megapascals" in a sentence
Basic
Advanced
megapascals
Measured in pounds per square inch or megapascals.
Megapascals in percent.
These can amount to several thousand megapascals.
The pressure is in Megapascals and the frequency is in MHz.
The hardness value obtained is expressed in megapascals or MPa.
The design pressure in megapascals is obtained from table 6, for the appropriate design parameter.
The readings to be expressed in megapascals.
Pressure at 41 megapascals and rising . I am reading a micro-fracture in the dilithium matrix.
The splitting strength st in megapascals.
Pressure at 41 megapascals and rising.
Is the tensile strength in megapascals.
Results are typically calculated in megapascals ( MPa ) and / or kilograms per centimeter ( kg / cm ).
Tensile strength at break in megapascals.
How to transfer from megapascals in Pascali.
P being the predetermined operating pressure prevailing in chamber 1, expressed in megapascals.
See also
Warp core pressure is at 36 megapascals and rising.
On top of that, the nanowood was also lightweight and could withstand pressures of 13 megapascals.
Having a uniaxial compression strength of at least 70 megaPascals measured on a solid specimen ;.
Using the new approach, the researchers produced welded joints with a tensile strength up to 392 megapascals.
Strength can also be measured in megapascals ( MPa ).
P being the pressure prevailing inside the chamber, expressed in megapascals.
The increase in loading to be 0.5 megapascals per second.
The results are recorded in pounds per inch and reported herein in MegaPascals ( MPa ).
Test results are reported in megaPascals ( MPa ).
Our conduits exhibit laminar flow . And testing revealed a tensile strength of 0.6 megapascals.
The lap shear is reported in megaPascals ( MPA ).
The temperature of the medium is slightly below 100 ° C. and the pressure is a few megapascals.
The rated charging pressure in megapascals ( MPa ) ;.
The pressure for forming such a laminate can be about 14 megapascals.
The lap shear strength was reported in megaPascals ( MPa ).
By comparison, the tensile strength of human teeth is a mere 500 megapascals.
Pressure drop across the CTM in megapascals.
The force at adhesive failure is recorded in megaPascals ( MPa ).
The TSS values were recorded in megapascals ( MPa ).
The lap shear is reported in units of megaPascals ( MPA ).
Let us keep it that way! Warp core pressure is at 36 megapascals and rising.
And testing revealed a tensile strength of 0.6 megapascals.
The compressive strength of that pipe is 500 megapascals.
The measured values of adhesion were about 20 megapascals ( MPa ).
The stresses can be approximately 5 to 40 megapascals.
A single human hair can take a force of 200 megapascals.
The pressure in the device varies over the range about 2 megapascals ( MPa ) to 12 MPa.
The gaseous host molecules generally require high pressures, namely from 0.5 MegaPascals to 5 MegaPascals.
It usually occurs in carbon steels with tensile strengths greater than 550 megapascals ( MPa ).
Why not? The compressive strength of that pipe is 500 megapascals.
Pressure is measured in units called pascals ( Pa ), or more conveniently, megapascals ( MPa ).
