Examples of 'mhz bandwidth' in a sentence
Meaning of "mhz bandwidth"
mhz bandwidth ~ a term used in technology and telecommunications to measure the capacity of a communication channel for transmitting data
How to use "mhz bandwidth" in a sentence
Basic
Advanced
mhz bandwidth
Each channel has a 6 MHz bandwidth as follows.
It is measured over the entire transmitted bandwidth of that station, not over 1 MHz bandwidth.
This signal is constrained to have a 6 MHz bandwidth in conformance with NTSC standards.
The VHT features may support the transmission and reception of such an 80 MHz bandwidth signal.
For example, a 5 MHz bandwidth can be utilized to increase the capacity.
However, more than half of these operators own less than 5 MHz bandwidth of contiguous spectrum.
The controllable digital filter 50 is operated as a narrow bandwidth filter, typically at about 2 MHz bandwidth.
This is accompanied by an impressive 350 MHz bandwidth on all four channels.
Different logical channels ( different hopping sequences ) can simultaneously share the same 80 MHz bandwidth.
Accordingly, a device determines that the full 160 MHz bandwidth has been assigned to a single device.
Radio transmitters with wideband modulation up to 10 MHz bandwidth.
One example is that of a 20 MHz bandwidth UE operating in a cell with 30 MHz bandwidth.
All terminals will be able to process 20 MHz bandwidth.
The 20 MHz channels making up the 80 MHz bandwidth need not be contiguous.
Still, each communication terminal at least supports the 5 MHz bandwidth.
See also
Integrated over a 1 MHz bandwidth.
A CCE group consisting of 72 symbol groups has been considered for a 5 MHz bandwidth.
As an example, a single carrier deployed over a 10 MHz bandwidth can include 50 resource blocks.
Consider the case of having 72 symbol groups within a CCE transmitted within a 5 MHz bandwidth.
The resource allocation field generator 935 partitions the 20 MHz bandwidth into first and second 10 MHz portions.
The NDPA frame is transmitted according to a duplicate frame structure while spanning a 160 MHz bandwidth.
The signal consists of nine carriers within 80 MHz bandwidth centered on 1 GHz.
The NDP frame is also transmitted while spanning a 160 MHz bandwidth.
Channel identification and carrier frequencies of 10 MHz bandwidth RF channels.
The NDPA frame includes information that the NDPA frame spans the 160 MHz bandwidth.
You can send twice as much data as a 10 MHz bandwidth.
For example, a legacy channel can have a 20 MHz bandwidth.
Video signals, as previously discussed, would have approximately 1.8 MHz bandwidth.
Communication multiplexer 178 will format this information into the 1 to 40 MHz bandwidth spectrum.
This standard allows the transmission of a 20 Mbps signal in a 20 MHz bandwidth.
For example, a low cost MTC may only support 1.4 MHz bandwidth.
Amongst other things, this standard allows the transmission of a 20 Mbps signal in a 20 MHz bandwidth.
Priority is given to the use of 5G mid-band test frequencies with a continuous 100 MHz bandwidth.
You'll also be interested in:
Examples of using Bandwidth
Show more
Upgrade of bandwidth and connectivity performance to COs
You must have really great bandwidth
The entire bandwidth is output without filtering
Examples of using Mhz
Show more
Agricultural vehicle with MHz remote controls
Canadian table of frequency allocations mhz
Frequency in MHz of the dot clock
