Examples of 'milling depth' in a sentence
Meaning of "milling depth"
milling depth - This phrase is used in the context of machining or woodworking to specify the depth of material that is being removed by a milling cutter or tool during the manufacturing process
How to use "milling depth" in a sentence
Basic
Advanced
milling depth
Set the milling depth as previously described.
Up until the pointer shows the desired milling depth.
The milling depth is adjusted in three stages.
Refer to the ruler on the fuselage to observe the drilling or milling depth.
The milling depth is adjusted in two steps.
The adoption of height adjustment system ensures accurate control of milling depth.
The milling depth is now set.
One full turn adjusts the milling depth by 1 mm.
Adjust the milling depth so that this is equal to.
Sources for the problems were as follows: joints and age of asphalt and milling depth.
Check the milling depth through a further practical test.
Fig . 8 is a perspective view of a milling depth gauge.
Set the milling depth with the step stop.
Fig . 9 is a front view of the milling depth gauge.
Bone milling depth gauge.
See also
The Full depth reclamation the actual layer thickness varied +-50 mm of the planned milling depth.
Set the desired milling depth with the lowest.
The milling depth can thereby be changed continuously during the milling.
The system includes a milling depth gauge and a sizing gauge.
Milling depth and machining times are minimised and “ air cutting ” is eliminated.
Fig . 8 is a perspective view of the milling depth gauge of this invention.
The required milling depth must be set before a new surface is started.
Fig . 11 is an exploded view of the milling depth gauge.
The maximum milling depth is calibrated with Axis Control.
One lock stage ( drill hole ) on the adjustment ring corresponds to a milling depth of 0.1 mm.
Set the milling depth with the control dial 15.
The milling depth can be adjusted with the control dial 15.
The recommended maximum milling depth per pass is 1.2 times the router bit diameter.
If required, the milling depth can be set precisely to the nearest 0.1 of a millimetre.
The recommended maximum complete milling depth ( media thickness ) is 3 times the router bit diameter.
You'll also be interested in:
Examples of using Milling
Show more
Set the milling depth as previously described
Users evaluate a combination of milling and turning
Conventional milling can also work perfectly
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
