Examples of 'miter lock' in a sentence
Meaning of "miter lock"
miter lock - This phrase refers to a type of locking mechanism used in carpentry or woodworking. It denotes a joint that enables two pieces of material to be securely locked together at a right angle, often used in constructing frames or corners
How to use "miter lock" in a sentence
Basic
Advanced
miter lock
Tighten the miter lock handle securely.
Place the threaded stud on the end of the miter lock.
Press down on miter lock plate to disengage.
Lock the miter table by securely tightening the miter lock levers.
Lock miter lock handle by pressing downward.
Do not lock the miter lock handle.
The miter lock handle securely locks the saw at desired miter angles.
Lower the miter lock lever.
Reposition the vise at the desired angle and tighten the miter lock handle.
Tighten the miter lock knob before cutting.
Rotate table to the extreme left position and lock in place using miter lock knob.
Tighten the miter lock handle by rotating it clockwise.
To make a miter cross cut, loosen the miter lock.
Tighten the miter lock knob and the bevel lock knob.
After selecting the desired miter angle, be sure to lock miter lock lever.
See also
Push down on the miter lock handle to lock the miter angle.
See Figure 3 and attach the miter lock.
Tighten the miter lock handle so that the table will not.
It is recommended to tighten the miter lock knob before all cuts.
Lift the miter lock lever and select the desired miter angle.
To avoid serious personal injury, ALWAYS tighten the miter lock handle securely BEFORE making a cut.
Lift the miter lock lever and press the miter lock button.
Release the miter detent button ( B ) and tighten the miter lock knob A.
Push down on the miter lock lever to lock the saw table in place.
The miter lock knob locks the miter saw table at any desired miter angle.
Insert the long shaft of the miter lock knob through this hole until it stops.
MITER LOCK, The miter lock handle securely locks the saw at desired miter angles.
To adjust, put the miter lock handle in the up position.
Lift the miter lock lever and move the miter arm to the zero position.
To adjust the miter lock rod ( P ), unlock the miter lock lever.
The miter lock knob should be at the 0 position.
Make sure the miter lock knob is loose but do not release the index spring.
Unlock the miter lock handle to move the miter arm to the zero position.
Always tighten the miter lock handle and bevel lock knob securely before making a cut.
Loosen the miter lock handle approximately one-half turn.
Rotate the miter lock handle approximately one-half turn to the left to loosen.
Loosen the miter lock knob and move the saw to the 0 miter position.
Attaching the Miter lock Knob - Locate the miter lock knob from among the loose parts.
To adjust the miter lock, put the miter lock handle in the unlocked ( up ) position.
Tighten miter lock knob Figure 30.
