Examples of 'mm hex' in a sentence
Meaning of "mm hex"
This phrase is likely to refer to a measurement or sizing specification related to a hexagonal shape. The 'mm' is an abbreviation for millimeters, suggesting the unit of measurement, while 'hex' refers to the six-sided polygon
How to use "mm hex" in a sentence
Basic
Advanced
mm hex
Adjustment is performed with a 4 mm hex wrench included.
Insert a 5 mm hex key into front of chuck between.
Tighten the setscrew using a 6 mm hex key.
Use the 2 mm hex key to remove the two screws.
Tighten the screws completely using a 6 mm hex wrench.
Use only a 9 mm hex wrench to adjust the flow meter.
Remove the bolt from the bracket using a 3 mm hex wrench.
Use a 4 mm hex to tighten all three mounting bolts in an alternating fashion.
Reinstall and tighten the set screw using the provided 3 mm hex key.
Use a 3 mm hex key to adjust the release tension of each pedal.
Install the top cover, and tighten the 5 mm hex bolt securely with a hexagon wrench.
Use a 2 mm hex wrench to tighten the push rod into the SwingLink.
Angle the loudspeaker as required and lock the bracket using the 5 mm hex key provided.
Use a 4 mm hex key to loosely attach each bolt to the sole of the shoe.
Flat-blade screwdriver or 7 mm hex nut driver.
See also
Use a 5 mm hex wrench to remove the bottom bolt from the lower leg.
Remove the 2 hex screws with a 4 mm hex wrench.
Loosen the 5 mm hex socket bolt with a hexagon wrench, then remove the top cover.
Install the top cover, and tighten the 5 mm hex bolt securely.
Using a 2 mm hex wrench, turn the Torque Adjustment Screw clockwise until it stops.
Replace the screws, and use the 2 mm hex key to tighten the screws.
Using a 2 mm hex wrench, rotate the Torque Adjustment Screw clockwise until the Screw stops.
Install the top cover, and tighten the 5 mm hex bolt securely see page.
Use the 4 mm hex wrench to loosen the.
Remove the cartridge fixing screws from saddle clamp body using a 2.5 mm hex key.
With a 3 mm hex wrench remove the.
Loosen the three hex head screws ( J ) with the 5 mm hex wrench provided.
Using a 4 mm hex wrench to remove the 3 mounting bolts.
Tighten the connector down using the supplied 2.5 mm hex wrench.
Using a 2 mm hex wrench, remove the disk bolt.
Remove the handle screw using the supplied 2.5 mm hex wrench.
Using a 5 mm hex key, hold the bolt in place.
Then, tighten each connector using the supplied 2.5 mm hex wrench.
Using an 8 mm hex key, remove the oil drain bolt.
Capacities Wood screw 6 mm Self drilling screw 6 mm Hex screw 6 mm.
Using the 3 mm hex key provided, loosen base pivot.
Remove bolt ( D ) from outboard end of deflector with 8 mm hex key.
With a 5 mm hex key, loosen and remove the bolt.
Replace the screw, and use the 2.5 mm hex key to tighten the screw.
Using a 2 mm hex wrench turn locking lever adjustment screw ( q ) in small increments.
Lock gear case by inserting a 4 mm hex wrench ( OO ) into locking hole.
Use a 2.5 mm hex wrench to remove the pad retainer bolt from the caliper.
Remove blade wrench ( 5 mm hex key ) from storage area.
Using a 2 mm hex wrench, unscrew the four outside screws of the transport plate.
Cable Anchor Bolt Reassembly 20 Using a 4 mm hex wrench, install the cable anchor bolt and washer.
Use a 2.5 mm hex wrench to remove the pad retention bolt from the caliper.
Remove the wheel wrench ( 5 mm hex key ) from the storage area.
Using a 5 mm hex wrench, remove the shoulder screw and the planet nuts.
Loosen the 5 mm hex bolt, then remove the top cover.
Using a 4 mm hex wrench, loosen the cable anchor bolt and remove the cable.
You'll also be interested in:
Examples of using Hex
Show more
I would not hex myself by saying yet
Hex wrench for loosening control knobs
Slightly undo hex socket head bolt
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
