Examples of 'hex bolts' in a sentence
Meaning of "hex bolts"
A type of fastener with a hexagonal head and a threaded shaft, used to secure two or more objects together
How to use "hex bolts" in a sentence
Basic
Advanced
hex bolts
Then tighten the hex bolts securely.
Standard hex bolts or cap screws are the most common.
They are attached with hex bolts.
Retighten the hex bolts when finished.
Hex bolts are a common choice for construction and repair.
Remove the hex bolts with hex wrench.
Loosen the two hex bolts.
The adjusting hex bolts are factory adjusted for.
Secure the camera in the bracket using the included hex bolts.
Tighten the two hex bolts on the rip fence.
Locate rear pinion bearing and loosen the two hex bolts.
Loosen the two hex bolts using a socket wrench.
Hex bolts are added for structural enhancements and to add an industrial vintage element.
Then tighten the hex bolts to secure the stay.
Be careful not to move the set angle while securing the hex bolts.
See also
Tighten the hex bolts to secure the gauge plate.
Mount top cap onto driver and insert four hex bolts into.
Loosen the hex bolts securing the gauge plate.
Fit the grip onto the pipe and tighten it with two hex bolts.
We need two hex bolts and one socket screw.
Tighten the grip securely and loosen the hex bolts on the guide fence.
Loosen hex bolts and lock nuts on two single brush.
Pulley by removing the two hex bolts and lock washers.
Remove hex bolts they are securing the driver guide cover with the hex wrench.
Secure the driver guide cover with hex bolts in the correct order.
Loosen the two hex bolts on the rip fence with the wrench provided.
Use the four hex nuts to secure the hex bolts to the unit housing.
Move the guide plate to the desired position and secure it with the hex bolts.
Loosen the two hex bolts on the rip fence with the.
Remove the deck belt cover by removing the three hex bolts that secure it.
Remove the two hex bolts which secure the guide plate.
Turn the guide plate to the desired angle and secure it with the hex bolts.
Remove the two hex bolts from the depth stake assembly.
Mount the work rests to the work rest bracket using the two hex bolts.
Reinstall the crank cap and tighten hex bolts firmly with the hex wrench.
Loosen three hex bolts which secure the crank cap cover and remove the crank cap.
Securely tighten the new back upholstery to the back canes with hex bolts and washers.
Tighten the grip and loosen the hex bolts securing the guide fence using the wrench.
Level the table insert by turning the necessary hex bolts at D.
Hex bolts Dimensions.
Plastic insulators must be assembled to hex bolts and bracket as shown in Figure C.
Maintain pressure on the receiver and re-tighten two of the hex bolts c.
To adjust the hex bolts, turn the hex bolts.
After adjusting the angle, tighten the hex bolts securely.
Tighten the 2 hex bolts that secure the rear pinion.
With the log splitter still standing upright, remove two hex bolts and.
To adjust the hex bolts, turn the hex bolts with a screwdriver or wrench.
To adjust the hex bolt height, turn the hex bolts with a screwdriver or wrench.
After obtaining the desired position, tighten the hex nuts to secure the hex bolts.
To change the cutting angle, loosen the two hex bolts which secure the guide plate.
You'll also be interested in:
Examples of using Hex
Show more
I would not hex myself by saying yet
Hex wrench for loosening control knobs
Slightly undo hex socket head bolt
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
