Examples of 'mm holes' in a sentence
Meaning of "mm holes"
mm holes - This phrase is likely referring to holes that are measured in millimeters, indicating their size or diameter in metric units
How to use "mm holes" in a sentence
Basic
Advanced
mm holes
Mm holes Number of holes.
In my construct you may find a large number of 3 mm holes.
Drill two 6 mm holes in the wall to match.
The fibres were blown in a drum with 6 mm holes or slots.
Drill ø 8 mm holes at all the marked centre points.
The meat is ground in mincers using blades with 6 mm holes.
Drill three 8 mm holes to install the suspension bracket.
Glue the two brass sleeves into the 4 mm holes.
With 8 mm holes for permanent installation.
Mince the meat using the strainer with 8 mm holes.
The 2 mm holes will not be clogged by thin output.
The simple assembly takes about 6 mm holes in the wall plate.
Make 8 mm holes for the steel expansion inserts.
The simple installation is carried out via 6 mm holes in the wall plate.
Heavy-duty mincer with 3 mm holes capable of homogenizing complete poultry pieces.
See also
The tissue obtained is ground and extruded through a grid having 4 mm holes.
The premix was extruded through a die containing 8 x 1 mm holes arranged in a circular pattern.
There was little different in the delivery kinetics between the 1 mm and 3 mm holes.
Drill three 6 mm holes in the wall, coinciding with the position of the mount holes.
The mixture was extruded under 2 bar pressure through a die plate with 2 mm holes.
Drill two 6 mm holes in the wall, coinciding with the position of the mount holes.
The formable composition was extruded by means of a hand extruder having a plate with 4 mm holes.
You will have to drill 3 mm holes for the mounting kit with this drill bit.
The solution thus obtained is pressed by means of a pump through a threader with 0.5 mm holes.
Drill ø 8 mm holes C for the chimney brackets.
Discs were laid in a 6 cm culture dish, and four 1 mm holes bored through each.
Drill Ø 3 mm holes at the points you have just marked.
The mix must be minced using a meat grinder fitted with perforated plates with 6-8 mm holes.
Drill ø10 mm holes and insert the dowels provided.
These results are compared to series 2.2 comprising ileostomy bags with 1 mm holes.
Drill 8 mm holes in the wall or ceiling.
Drill one 40 mm in the center and two 10 mm holes for the mounting screws.
Drill 7 mm holes for the attachment screws and one 9.5 mm hole for the square.
They are simply inserted into 12 mm holes in the mortar lines of a building.
Parts and accessories comprising, 9 Screen with 8 mm holes.
Hood and 2 x i 8 mm holes for the chimney panelling.
Connector, drill 2x l 3 mm holes and screw together.
The modules have 3.1 mm holes in the corners with which they can be assembled.
Drill 4 x i 8 mm holes for the extractor.
Drill two 8 mm holes to install bracket 2.
The lids had 12 mm holes plugged by non-absorbent cotton.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using Holes
Show more
Great holes have been cut in the earth
Always remove the lid or put holes in it
They cut holes behind every cabinet
