Examples of 'mm will' in a sentence
Meaning of "mm will"
MM will: This phrase is commonly used in business to indicate a future action or decision that a company or individual plans to take
How to use "mm will" in a sentence
Basic
Advanced
mm will
A small cut of about 5 mm will be made in or near your navel.
Unless stated otherwise, the PAZ model with a blade spacing of 13 mm will be delivered.
Exceeding the clearance depth of 15 mm will damage the pen display internal components.
However, any thickness from about 3 to 7 mm will suffice.
This rise 6 of at least 5 mm will achieve significant benefits in pouring and reduced surge.
In some embodiments, a concentration less than 1 mM will nonetheless be used.
Denticulation with height 7 mm will maintain a significant part of its capacity at such a crack span.
For practical reasons, a minimum ionic strength of 5, especially 10 mM will apply.
A depth of about 10 mm will usually be appropriate.
In case of a RMS working voltages not exceeding 250 volts a creepage distance of 1.5 mm will suffice.
Annular spaces having a radial thickness of about 3 mm will generally give satisfactory results.
Generally, 1 mm will be sufficient, although greater distances are preferred.
However, deposits less than 1 mm will not cause any problem.
In any case, 35 mm will always be useful to store films in the film libraries.
Therefore, the distances of the order of 5 mm will bring about a good result.
See also
An overlap of 300 mm will be provided for every modulation to obtain complete water tightness.
Microbeads with a diameter of between 500 um and 4 mm will be obtained depending on the procedure.
As little as 2 mm will suffice here although the depth is typically 2.5 mm.
Do you know when Mr. Stu mm will retu rn?
The amount 0.1 mm will not be recorded at any time.
Therefore the amount 0.1 mm will never be recorded.
The 9 mm will help too.
A thickness between 0.5 and 1 mm will in most applications be optimal.
The width of more than 50 mm will tend not to increase the desired effect.
Particle sizes above 1.5 mm will give acceptable pressure drops.
A flow cross section diameter of 1 mm will preferably correspond to a length of 500 mm.
Finally, a headphone jack of 3.5 mm will be part of the body of the phone.
Note, the current bicone 2,5 mm will not benefit from the new Xilion.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using Will
Show more
I will have no time with you alone
This transport will take you there
You will be there for six weeks
