Examples of 'mm wrench' in a sentence
Meaning of "mm wrench"
A mm wrench is a type of tool used to tighten or loosen nuts and bolts that have metric measurements, specifically in millimeters. It is commonly used in mechanical and automotive applications
How to use "mm wrench" in a sentence
Basic
Advanced
mm wrench
Mm wrench for rack removal from pallet.
An adjustable wrench or small pliers can be used if an 8 mm wrench is unavailable.
Mm wrench for reversing the front door.
Loosen the lock screw with a 5 mm wrench.
Use a 17 mm wrench in order to adjust the legs.
Remove the breakaway nut using a 15 mm wrench.
Using the 13 mm wrench supplied, turn the blade nut counterclockwise.
Open drain valve by using a 10 mm wrench turning.
Using the 16 mm wrench supplied, turn the drive connector counterclockwise.
Loosen enclosing tube nut with a 35 mm wrench.
Use the 10 mm wrench to apply a small amount of torque to keep it closed.
Tighten the universal clamp to the shaft 10 mm wrench.
Loosen the blade nut using a 14 mm wrench or soc et not provided.
Fasten the screws on to the insert with a 13 mm wrench.
Loosen the Made nut using a 15 mm wrench or socket netprovided.
See also
The lock nut needs to be loosened with a 10 mm wrench.
Use a 24 mm wrench to remove the orifice nut.
The nozzle can be changed using a 14 mm wrench not supplied.
Use a 10 mm wrench to loosen the adjustment.
Easily unscrew the screws on the riving knife with a 13 mm wrench.
Remove the blade fixing nut with a 19 mm wrench and a 5 mm Allen key.
Tighten air valve assembly using fingers first, then tighten with 14 mm wrench.
Tighten securely using 10 mm wrench and 8 mm socket.
To lower the foot further, tighten the hex nut clockwise with a 12 mm wrench.
Replace the NG orifice with 6 mm wrench.
The Radius hinge can be adjusted ( tightened or loosened ) with an 8 mm wrench.
Remove the wheel using a 15 mm wrench.
On the back of the washer, loosen the 4 transport bolts using a 13 mm wrench.
From bottom side of base, secure screws with nuts and washers, 13 mm wrench required Figure 1.
Remove the 4 plastic lids and adjust the legs with a 17 mm wrench.
Remove the sediment cup using a 10 mm wrench.
Remove the sediment cup with a 10 mm wrench.
Remove the sediment cup and O-ring with a 10 mm wrench.
Remove the ( Liquid Propane ) orifice with 6 mm wrench.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
