Examples of 'mode switch' in a sentence
Meaning of "mode switch"
The term 'mode switch' refers to the act of changing or transitioning from one operational mode or state to another. It is commonly used in various contexts, such as technology, software, or equipment, where different modes or settings can be selected to perform different functions or tasks
How to use "mode switch" in a sentence
Basic
Advanced
mode switch
The mode switch has these settings.
Setting the vibration reduction mode switch.
Mode switch to switch into different modes.
Attend to proper snapping of the mode switch.
Mode switch for the internal reflector.
Set the fl ight mode switch to stability mode.
Mode switch for inner reflector.
Properly set cleaning mode switch.
Set the mode switch to clock set.
Properly set scrubbing mode switch.
Set mode switch to to activate playback mode.
Playback sequence with rev mode switch setting.
Operating mode switch controls inverter operation.
To select radio operating mode switch on.
View mode switch of graphical user interface.
See also
Clean channel with mode switch.
Mode switch has been turned off and back on.
It is also unnecessary to provide a static mode switch separately.
Turn the mode switch to the previous position.
The analog mode and digital mode switch alter.
Mode switch is not set to slush.
Conversion is available via the mode switch after startup.
Set the mode switch to the required position.
Assign gain values for each flight mode switch position.
Put the mode switch in the middle position auto.
Operating mode switch.
Put the mode switch in the left position audio.
Select the desired speed with the operation mode switch.
Put the mode switch in the right position manual.
For use only with models containing the weight mode switch.
Press the mode switch on the signal conditioning instrument.
The controller will energise in the mode according to the mode switch.
Push the mode switch lever to the desired position.
You control which unit of measurement is shown by using the mode switch.
The assigned flight mode switch does not need to be in a particular position.
The control circuit determines an operation mode set by the mode switch.
Slide the alarm mode switch to set the type of alarm.
One control panel connector for front LEDs and enclosure mode switch.
Pressing the mode switch during use will change the mode.
The flashing motor LEDs indicate that a mode switch has taken place.
Ensure the fl ight mode switch is in the desired position before fl ying.
The mode is selected on the signal conditioning instrument with the mode switch.
The operating mode switch shall be positioned according the table below.
The inverter is equipped with an efficiency mode switch to minimize fuel consumption.
Check the mode switch before flight to be sure it is in the correct mode.
The camera now operates in the mode set using the mode switch.
Switch the mode switch to the left to use the summer mode.
Between the input signal connections of the both channels is an operational mode switch provided.
Switch the mode switch to the right to use the winter mode.
Also the master station uses that reserve time to confirm the mode switch request.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Mode
Show more
Automatic mode should be selected in normal cases
We have even developed a secret mode of communication
Void mode transaction counter and total
