Examples of 'monomer content' in a sentence
Meaning of "monomer content"
monomer content - This refers to the quantity or proportion of monomers present in a substance, especially in the context of polymers and chemical compounds
How to use "monomer content" in a sentence
Basic
Advanced
monomer content
The monomer content is very stable.
Some properties will vary due to monomer content.
The monomer content is not changed for the stressed materials.
Latent residual monomer content.
Then pH is adjusted according to the neutralization degree of the total monomer content.
This produces a low polymerized monomer content in the surface layer.
Thermoplastic molding compounds with an optimized residual monomer content.
The free monomer content of the vinyl polymer dispersions is monitored by gas chromatography.
A fine particle size latex of low monomer content was obtained.
The residual monomer content was calculated from the peak área of the monomer.
At certain intervals a sample is taken and the monomer content is analyzed.
A residual monomer content of less then 1.
This cycle was repeated three times to reduce residual monomer content.
These methods for reducing the residual monomer content are accompanied with several difficulties.
The process used results in a copolymer having a low residual monomer content.
See also
A residual monomer content of less than 1.
All monomers are reported as percentage of the weight of the total monomer content.
Reducing residual monomer content of the polymer product by,.
Increasing the irradiation time is seen to reduce residual monomer content for a given intensity.
One disadvantage is the residual monomer content of polyisocyanates, more particularly the more volatile diisocyanates.
The samples with HEPES buffer show a comparatively smaller decrease in monomer content.
The total residual monomer content was less than 5 percent.
Samples of the prepolymer melt were taken periodically and analyzed for monomer content using GPC.
The composition contains a very low or no monomer content depending on acceptable exotherm levels / values.
Needed, mutagenicity studies and specify monomer content.
This product, with a low residual monomer content is acceptable for the treatment of drinking water.
Upon photolysis, there is also a small decrease in monomer content.
Residual monomer content RMC, expressed in ppm.
This period of heating serves to minimize the residual monomer content of the copolymer produced.
The styrene monomer content of the obtained plaques is measured by HPLC / UV.
It contains a depiction of the monomer content at t2.
The residual monomer content of the powder was 41 ppm.
The exiting gas stream 4 has a very low monomer content.
Purity, yield, monomer content were measured.
As the concentrations of each excipient are increased, the monomer content at t1 is increased.
The additional monomer content of the copolymer is preferably at most 20 w %.
Preferably the reaction is carried out to give a monomer content of less than 70 percent.
The residual styrene monomer content in the devolatilised polymer was found to be 160ppm.
The amphoteric polymer preferably has an anionic charge monomer content of up to 40 mole percent.
The residual styrene monomer content in the treated polymer was found to be 500 ppm.
However, such compounds can sometimes pose problems owing to their residual monomer content.
For polyethylene, ethylene will form the major monomer content present in any polyethylene polymer.
Process for the preparation of glycidyl ethers of di-secondary alcohols with high monomer content.
Likewise, a model was constructed using the monomer content by SEC at t2 as the endpoint.
L4 shows results for a composition with a latex containing a copolymer with zero acid monomer content.
The residual styrene monomer content may preferably be at most 50 ppm.
The polymerisation reaction is generally continued until the residual monomer content is below about 1 %.
The monomer content of the sample was approximately 87 % of the total albumin in the sample.
See Table 3 for exemplary useful ethylene monomer content.
The lactide residual monomer content was measured by gas chromatography ( GC ).
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Monomer
Show more
It is the monomer of condensed tannins called profisetinidins
The preferred methacrylic monomer is methyl methacrylate
A monomer is the basic building block of a polymer
