Examples of 'monomer emulsion' in a sentence
Meaning of "monomer emulsion"
monomer emulsion - A type of emulsion consisting of monomers, which are small molecules that can bond together to form polymers. Monomer emulsions are used in the production of various materials, including paints, adhesives, and coatings
How to use "monomer emulsion" in a sentence
Basic
Advanced
monomer emulsion
A monomer emulsion consisting of the following is prepared.
The contents of the reactor are agitated to prepare a monomer emulsion.
A monomer emulsion is prepared from the following ingredients.
Thereafter they are combined and homogenized to yield a monomer emulsion.
The monomer emulsion is milky.
Preference is given to supplying the monomer in the form of a monomer emulsion.
Monomer emulsion feed is continued for another hour to completion.
It was mixed until the monomer emulsion showed no separation upon standing.
The presence of such material improves the stability of the monomer emulsion.
A monomer emulsion consisting of the following is prepared for each.
The mixture was sufficiently stirred to obtain a monomer emulsion containing the monomer mixture.
The monomer emulsion is milky and the resultant polymer emulsion is stable and clear.
The contents were mixed until the monomer emulsion showed no sign of separation upon standing.
Separate initiator and reducer solutions were added over the course of the monomer emulsion addition.
Dropwise add the rest of the monomer emulsion into the reaction vessel over one hour.
See also
A monomer emulsion was prepared according to the recipe shown in Table A.
Thus, a homogenized monomer emulsion was obtained.
The mixture was agitated vigorously, thereby forming a monomer emulsion.
The remaining monomer emulsion was fed to the kettle at a rate of 4 grams / minute.
To the slurry was added, simultaneously, a monomer emulsion and a initiator solution.
Example 3 was repeated except the methacrylic acid was added to the monomer emulsion.
Initiating the copolymerization of said monomer emulsion by raising the temperature of the emulsion ;.
This monomer emulsion was continuously charged into the reactor for approximately 2 hours.
The reaction was allowed to continue for 2 hours after monomer emulsion addition was complete.
A 4 % portion of the monomer emulsion was added and immediately polymerized or a polymer seed was added.
When the feeding is complete, 76 g of triisopropoxyvinylsilane ( constituent d ) are added to the monomer emulsion.
The second monomer emulsion was then added within 90 minutes to the reaction content.
Changes, The following monomer emulsion is used.
When the monomer emulsion feed is completed, the initiator solution is continued until finished.
The procedure used to prepare the monomer emulsion in Example 3 was used here.
Monomer emulsion 2 was then fed to the reactor over approximately 60 minutes.
Addition of the monomer emulsion charge begins 10 min.
The mass of this solution is 30 % of the mass of the seed monomer emulsion.
After five minutes, the monomer emulsion was feed to the reactor over a two hour period.
At the end of this time about 3/4 of the monomer emulsion has been fed.
A 4 % portion of monomer emulsion I was added and immediately polymerized or a polymer seed was added.
The initiator cofeed was then restarted and monomer emulsion 2 was added over 55 minutes.
A first stirred monomer emulsion consisting of the ingredients listed in Table 1 was prepared separately.
A solution of 1.1 g ammonium persulfate in 60 g water is added concurrently with the monomer emulsion feed.
The first monomer emulsion was fed over a period of 60 minutes.
With the reactor charge temperature at 82 ° feed of the monomer emulsion is begun at 3 g / minute.
The resulting monomer emulsion is sparged for 60 minutes with nitrogen.
Then 116.2 g acrylic acid is added to the above monomer emulsion and rendered homogeneous.
The monomer emulsion was then added to the kettle at a rate of 5.5 g per minute.
Immediately thereafter, the second monomer emulsion was fed over a period of 40 minutes.
The monomer emulsion was rinsed with 50 g DI rinse.
On completion of monomer feed, the monomer emulsion tank was rinsed with 30 parts water.
A monomer emulsion ( ME 1 ) was then charged to the kettle followed by an initiator.
As soon as possible a feed of monomer emulsion A as described below is begun . Table 20.
Feed monomer emulsion A over a period of thirty minutes while maintaining the temperature at 70°C.
You'll also be interested in:
Examples of using Emulsion
Show more
The emulsion or coating reduces asphalt penetration
Mix with adjuvant emulsion before use
Netvax emulsion for injection for chickens
Examples of using Monomer
Show more
It is the monomer of condensed tannins called profisetinidins
The preferred methacrylic monomer is methyl methacrylate
A monomer is the basic building block of a polymer
