Examples of 'nails or screws' in a sentence
Meaning of "nails or screws"
Nails or screws: These are commonly used fasteners in woodworking and construction to join two or more pieces of material together. Nails are typically hammered into place, while screws require twisting to secure. Both serve the purpose of creating a strong connection between materials
How to use "nails or screws" in a sentence
Basic
Advanced
nails or screws
Adhesive with nails or screws same as above.
Not recommended for cutting nails or screws.
No nails or screws are needed to complete the process.
All wood with nails or screws.
Nails or screws are just as hard to pull out.
You may use nails or screws for this.
Secure box to wall stud using nails or screws.
Attach securely with nails or screws provided by the installer.
Make sure the work surface is free of nails or screws.
Without nails or screws and without damaging your walls.
Never plane over metal objects such as nails or screws.
It has no nails or screws.
Conduit is recommended for added protection against nails or screws.
Use more nails or screws than necessary to temporarily position supports.
Install headers between joists using nails or screws leaving.
See also
Nails or Screws to create the shape.
Most kinds of staples are easier to produce than nails or screws.
There should not be any nails or screws sticking out from the surface.
Enclosure should be glued together and secured with nails or screws.
Use the nails or screws through sleeve into wall, if needed.
Easily installed by nails or screws.
No nails or screws are needed for assembly ( a revolution for the construction industry ).
Usually decking planks are secured in place with galvanised nails or screws.
Lastly, if there are any nails or screws in the walls remove them.
They must also be fixed to the sub floor with nails or screws.
Secure with four nails or screws ( not provided ) to ensure proper installation Figure 5.
Most tools can be easily hung on the wall using nails or screws.
Nails or screws - it's all the same.
Poplar wood is easy to work with and resists splitting when taking nails or screws.
Galvanized nails or screws may be used to secure the strap every 6 " to 10.
To hold the construction together the fishermen does not use nails or screws but specific tiebacks.
SkanDek (e.g. nails or screws into steel beams or cast steel rails).
Traditional Japanese furniture is made without using any nails or screws.
Grand Strategic: Am I better deciding if nails or screws are to be used.
APPROXIMATIVELY Secure the end planking railings using nails or screws.
In traditional “ okuriari, ” no nails or screws are used.
Cross-bars are preferably aluminium angle bars, fastened to the beams with galvanized nails or screws.
Never use on metal objects, nails or screws.
Next to this I decided to build this one without nails or screws.
Never cut over metal objects, nails or screws.
If in doubt, check workpiece for inclusion of foreign matter e.g. nails or screws.
Doesn't split by drilling with nails or screws.
If in doubt, check work piece for inclusion of foreign matter e.g. nails or screws.
Never plane over metal objects, nails or screws.
Press it firmly onto the anchor and secure it with two ( 2 ) nails or screws.
Note, Do NOT fix feet to floor using nails or screws.
The sheet may be fixed to the substrate e.g. by nails or screws.
Nail Holes ( 3 ) - allows you to hang the wall mount onto nails or screws.
Mm MAXIMUM 2 ″ ( 50 mm ) APPROXIMATIVELY Secure the end planking railings using nails or screws.
You'll also be interested in:
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Nails
Show more
I can pound nails with this thing
Nails clipped just like the others
A couple of nails will put that right
