Examples of 'new sanding' in a sentence
Meaning of "new sanding"
new sanding ~ a process of smoothing or polishing a surface using sandpaper or a similar abrasive material for the first time
How to use "new sanding" in a sentence
Basic
Advanced
new sanding
Remind me to show you my new sanding technique.
Place new sanding belt over sanding drums.
Peel the backing from a new sanding disc.
Place a new sanding belt making sure that the.
After installing new sanding paper.
Slide a new sanding belt over both pulleys and platen plate.
Replace it with a new sanding belt.
Press the new sanding disc firmly into position on the disc plate F.
Reverse these steps to install the new sanding sleeve.
When installing a new sanding belt, proceed as follows.
Make sure the disc plate is clean before you attach the new sanding disc.
This enables fast attachment of new sanding sheets without the use of a clamping fixture.
Carry out a test run for approx . 20 seconds with the new sanding belt.
Put a new sanding belt on the machine, make.
Sanding disc too coarse Fit new sanding disc with finer grit.
See also
Lay new sanding paper tightly over sanding plate, ensuring.
Sanding sheet too fine or worn Fit new sanding sheet with coarser grit.
Attach the new sanding plate 5 and tighten the screw again.
Sanding disc too fine or worn Fit new sanding disc with coarser grit.
Attach the new sanding plate 9 and tighten the screws again.
Clean the upper side of the new sanding plate 4.
When attaching a new sanding sheet, remove any dust or debris from the sanding plate 4.
When changing materials, for example, from metal to wood, always fit a new sanding belt.
Before placing on a new sanding sheet, free the sanding plate from dust and dirt.
The sanding belt ( 8 ) . u Remove the old sanding belt . u Place a new sanding belt over the rollers.
Before fitting new sanding sheets, remove any dust and dirt from rubber backing pad 2.
Mount the new sanding belt 2.
Before fitting a new sanding sheet, remove any dust and dirt from the sanding plate.
Mount the new sanding arm 16 and fasten it with adjust.
Before attaching a new sanding sheet 9, remove dust and dirt from the sanding plate 8.
Note, Before securing a new sanding sheet 5, remove all dust and dirt from the sander plate 4.
You'll also be interested in:
Examples of using New
Show more
I am opening up a new checking account in my own name
A new project on legal notice publication was launched
I will not be a new mother and a resident
Examples of using Sanding
Show more
Sanding sheets are available in a variety of different grades
Recoatable without sanding of the previous layer
Sanding discs are available in a variety of different grades
