Examples of 'sanding' in a sentence
Meaning of "sanding"
Sand: A verb referring to the act of spreading or covering something with sand or using sandpaper to smooth a surface
Show more definitions
- present participle of sand
- The act or process by which something is sanded; the application of sandpaper, etc.
- A type of dancing where the floor is covered in sand. See Sanding (dance).
- The process of testing the surface of gilding, after it has been fired, with fine sand and water.
How to use "sanding" in a sentence
Basic
Advanced
sanding
Sanding sheets are available in a variety of different grades.
Recoatable without sanding of the previous layer.
Sanding discs are available in a variety of different grades.
Replace worn or torn sanding paper immediately.
Sanding his boat without eye gear.
Be careful when sanding the stone components.
Sanding should be done in a manner to reduce tracking of paint.
Always finish by sanding with the grain.
Sanding of lead based paint is not recommended.
For detailed sanding to suit this shape.
Sanding disc or belt glazed with sap.
Gradually lower sanding pad to the floor.
Use sanding discs and accessories that are.
Ideal for initial sanding on rougher surfaces.
Sanding cfm cutting cfm air inlet.
See also
Remove adherent sanding dust with a brush.
Sanding disc or belt covered with grease.
Do not throw sanding dust on an open fire.
Sanding full wooden and veneer edges.
Replacing the sanding disc or floor brush.
Sanding with the backing pad option.
Be careful when sanding the soapstone surface.
Sanding tight and hard to reach areas.
Do not use a worn sanding paper or sanding.
The sanding paper clamp is now loose.
Sparking occurs when sanding metal materials.
Check sanding disc regularly for faults.
The new guy is sanding the walls.
Check sanding sleeves regularly for faults.
Removing rust and sanding metal surfaces.
This sanding equipment requires a supply of electricity.
The pressure on the sanding belt is insufficient.
Sanding backing pads are available as optional accessories.
Remove adhering sanding dust with a brush.
Sanding bands work best at lower speeds.
Position the sanding sheet and press on.
Sanding tool for nTx sanding disc.
Then we can start sanding and smoothing.
Been sanding this shit for two days.
Do not touch the moving sanding disc.
Remove the sanding belt as described in ASSEMBLy.
Thoroughly remove all dust after sanding.
Do not start sanding without sandpaper fitted.
Never touch the running sanding belt.
Remove all sanding dust and contaminants.
Press the sandpaper to the sanding plate.
Center the sanding disc on top of the.
For a medium finish for profile sanding.
For final sanding of primers before coating.
For a medium finish for detailed sanding.
